How To Install a CV Fabrication Air Intake (w/ before & after sound clips)

[Waterfowler41]

Pretty straight forward project in this one. To install the new CVF intake the factory tube and top half of the intake need to come off.

 

[goodshot]

What is the vent tube insert they are talking about on the sale page? Is that necessary for install?

 

[goodshot]

I just did this on my 22 37" this morning.

Easy install other than the hose clamps for the small crossover pipe aren't long enough so I had to run out and get some. Mildly annoying and unnecessary issue.

Helps hear the turbo induction a bit more. Not a crazy amount but with the exhaust in quiet mode you can hear them spool a little bit more which I like.

Overall I am happy with it.

 

[Waterfowler41]

What is the vent tube insert they are talking about on the sale page? Is that necessary for install?

It's helps ensure there's a proper amount of vacuum pulled on the crank case vent line. I was going to try and run it with and without just to see but that CCV orange fitting is such a pain the butt to pull off (its technically a tamperproof fitting but can be removed with a 5/8" quick disconnect tool if you're careful) I didn't want to chance breaking it.