I'm stuck...2014 center console

[Boefadeez]

Does anyone know if there are screws at the front of cup-holder/gearshift piece? I have the piece most of the way out but something is still hung up on the forward end...

---------- Post added at 12:59 PM ---------- Previous post was at 12:30 PM ----------

Nevermind. Just yanked the six 5/16 screws holding the rest and slid it all back

 

[The Car Stereo Company]

https://www.youtube.com/watch?v=4t8SrfOWPKU

here is a video i made recently. it should help with the reassembly if you forget

 

[Boefadeez]

Thanks, Noah. I searched for videos but I guess I missed that one. Only thing I did differently was I popped out the Upfitter switches first, disconnected the three harnesses, then removed the lower trim piece (with the 'SYNC' emblem), and removed the two bolts after that. THe front clips on the center piece ended up being my PITA.

 

[R1jamn]

https://www.youtube.com/watch?v=4t8SrfOWPKU

here is a video i made recently. it should help with the reassembly if you forget

Excellent video Busa.
I was able to replace a few aluminum trim pieces on the passenger side dash with very little difficulty.

 

[BAJASVT]

Excellent video Busa.
I was able to replace a few aluminum trim pieces on the passenger side dash with very little difficulty.

R1 - What pieces did you replace and why?

 

[R1jamn]

^^^
When I picked up my new '14, one of the passenger trim pieces had a dent and a scratch in it.
My local Ford dealership ordered a new part and installed it.
Unfortunately when they replaced it they had also dented and scratched up two other pieces of aluminum trim on the passenger side.
They ordered replacement parts and when they arrived I simply explained that I will take the new parts and install them myself.

This is what the tech at the dealership had done.
The tech also scratched the airbag cover, but they weren't willing to replace that.

 

[The Car Stereo Company]

im glad the video helped you out. sucks they wont replace the airbag cover though. if they scratched it, they need to replace it.

 

[R1jamn]

^^^
I may need to lean on them a bit more with the airbag.
Still need to get the bumper fixed (again) also. They replaced my bent bumper with a dented bumper.

 

[The Car Stereo Company]

damn, you got all the bad luck. its a new truck. any damage done should be made by you and you only. definitely make them fix it right.

 

[FvilleRaptor]

^^^
When I picked up my new '14, one of the passenger trim pieces had a dent and a scratch in it.
My local Ford dealership ordered a new part and installed it.
Unfortunately when they replaced it they had also dented and scratched up two other pieces of aluminum trim on the passenger side.
They ordered replacement parts and when they arrived I simply explained that I will take the new parts and install them myself.

This is what the tech at the dealership had done.
The tech also scratched the airbag cover, but they weren't willing to replace that.

How were you able to get your Raptor with the aluminum trim. I would like to get it on mine. Do the 2014 come stock with the Aluminum trim?