Husky Wheel Liners 95 Bucks on Amazon

[Mariners Fan]

Also, these will be very easy to trim for bump stops when the time comes. The pocket in the back is almost a perfect template. One could probably bolt a piece of metal or even a carpenters square to the two holes as a cutting guide.[/QUOTE]

That's what I was really hoping to get some feedback on. I'm eyeing the Icon hyd. bump stops kit and was wondering about fitment. Thanks man!

 

[Garys Blue Raptor]

Ok, so I got the wheel liners for the $95 and here is my input. They are nice but they don't just pop in and fit right up neither does the lower wheel hole at the fender flare. I had to trim an inch off the front lower area to fit in my wheel well so no issue but I had a Metabo. Now for the next part of a PITA. Lucky I had the tool to remove the fender flare because that made it far easier to get these in there and done. I also went with someone else's info that on the 2018 Raptor there is only one screw for securing the side and where there should be a second screw it can flop / move. So I drilled a small hole and used a plastic trim securing part that just pushed in there and keeps it snug. If I know I needed to remove the fender flare when I started I could have done it faster. Anyway it's nice just not as simple as it is led to be.

 

[BroncoAZ]

The critical things for mine were trimming the outer lip that tucks in the fender flares to ~1" wide and cutting about 3/4" off each end to fit it in the fenders. Mine were consistent where the front hole to the factory bolt ended up off 3/8" or so.

 

[WestTXRaptor6]

I tried 2 sets of these from Husky years ago on my 2018. Neither fit and didn't feel like modifying them. Had the wheel wells Line-Xed and never looked back.