How best to add foglights and other Leds to Headlights and auto high beams

[FrenchRaptor]

Just going from what the technician told me. He had half the front end apart trying to get behind the headlight when I told him to stop.

 

[BDF]

Wonder if anyone makes a T to go between the headlight and wire harness

 

[TRMFAM]

Wonder if anyone makes a T to go between the headlight and wire harness

Like this? https://www.f150forum.com/f118/make-led-headlight-harness-if-you-dont-want-t-tap-factory-406090/

Post #10 in this thread from @smurfslayer

 

[BDF]

I knew I saw that...

Do we know if it's good all the way up to 2020 trucks?

Didn't read it all, but kind hoping it will do headlights and high beams

I want my fogs on with headlights and 40" led bar on with high beams

 

[FrenchRaptor]

Good question. I’m waiting for that info as well. My technician said the wiring was somehow different on my 2020 than previous years. Not sure why but we had to temporarily wire direct to the upfitter switch and not tie into the high beams.

 

[BDF]

Yeah, that's where I'm at, all upfitter, but mine is a 19. Just don't want to cough up 50 or 60$ for wires that won't work.

Also need to know what wires are what

 

[Bulldog82]

Smurfslayer, Would the adapted tap above be the same as someone mentioned about a trigger in the kick panel? I am wondering how to find the trigger wire behind the kick panel.

 

[smurfslayer]

I’m not familiar enough with what all runs through the kick panel itself.

 

[TRMFAM]

Adam @4x4TruckLEDs.com mentioned the kick panel hi-beam trigger in post #6...maybe he can provide more information on how to locate?

 

[FrenchRaptor]

I’m so annoyed with this high beam trigger thing! Is there any way to get to the trigger wire behind the driver side headlight without having to tear apart the front end of the truck?? Passenger side is a mess and I hear the driver side is easier...