HiLift Jack Mounted in the Bed - Tons 'o Pics!

[Yukon Joe]

Actually, I can't take the credit for the. I saw that 6.2 ordered some. It got me thinking...

Yukon Joe
Buffalo Run Support Raptor
http://www.fordraptorforum.com/showthread.php?p=364119

 

[firematt422]

I ordered a set of the 4xRAC mounts. I'm hoping I can make them work, along with a shovel mount.

Hi-Lift 4X400 - Hi-Lift Jack® Bumper Mount 4xRac - Quadratec

Using a quick fist clamp and a plate, I'm would like to do something like this.

All New 05+ Tacoma Hi-Lift Bed Mounts from ATO! - Page 6 - Tacoma World Forums

Only thing is, I don't have access to a shop or materials for the plate. Maybe you or WSI? Obviously, compensation would be made for such generosity. :beer: :beer: :beer:

Yukon Joe
Buffalo Run Support Raptor
RPG and WSI present The South Dakota Buffalo Run - FORD RAPTOR FORUM - Ford SVT Raptor Forums - Ford Raptor

Yeah, we could figure something out. I've got tons (literally) of bar stock. WSI is your welder, and I've got the machine shop. Between us we can make it happen.

I'll probably be making a shovel/axe mount as well. I've seen the 4xRAC ones, but I wanted something that locked, so I just made one.

 

[Squatting Dog]

Give ya a hug for one...

-Greg (aka squatting dog)

 

[firematt422]

You drive a hard bargain...

 

[Yukon Joe]

I was practicing with the hi-lift this weekend. Not too bad on level ground.
Will be looking for something that really ties the jack to the tow hook for a safer solution.

 

[602Raptor]

What is the feasibility of making a mount that goes from the bed rail to the cargo hook mounts already in the bed? This would make use of a location already designed to carry a load and not have to drill additional holes. I would like to make mounts like this on both sides of the bed using bar stock or similar to mount recovery gear and a hi-lift in the unused space.

Thoughts?

 

[McDowell]

I could build something like that really easily As I work and partially own a welding shop


Sent from my iPhone