GEN 1 High Angle Cv Axles

[mtnghost]

I too am curious about how these axles are holding up. I had a set of these rebranded for Napa on my 4x4 Dakota and they were absolute ****. I replace two under warrantee within two highway drives of 40 miles, and the replacements blew out within a month. Hopefully that is not the case with these for the fords. Would really like to try these on the gen 1.

 

[2012SCSVT]

Modified the CAS pearch and the axles are hanging in there now with 14" of stock width travel. Also I did do the IWE delete so we will see how the axles last now.


View attachment 1000005880.mp4

 

[TomDirt]

My project is right behind you.

And by that I mean 2025

 

[2012SCSVT]

Get after it!!

 

[TomDirt]

As soon as I finish the last 700' of this:

 

[2012SCSVT]

As soon as I finish the last 700' of this:View attachment 454216View attachment 454217

Your Raptor will be attacking that fence. Checking for weak spots.

 

[TomDirt]

This guy is the culprit.

 

[rschap1]

How deep below the surface does the fence extend??

 

[TomDirt]

The installer just set it at "grade", around 8 years ago. With the constant wind & the lightweight silt over time it gets built up at the fence line. About every 2 years max, you need to dig out all the blowsand, weeds, trash, etc, that accumulates.
The dogs certainly enjoy their digging, but they can't dig enough to get out without me noticing. Typically, I'll just drop those 26lb concrete stackable blocks in the hole. There's an extra pallet of them in the yard that were left over from the solar "farm" project just so I can do that.