Help!?

[F23 raptor]

Hey guys, so I have a 23 raptor with the 801a. Put the triple fog light kit and rigid rear lights on and working fine. Fogs are ran on fog switch, aux 1, aux 2. Wired the rears to aux 3 and nothing... the lights are on with red back lighting when approaching, Truck running and lights kick on when in reverse. I turned the aux 3 switch on and nothing happens. Checked the fuse and it's good, we checked the wire with the switch on and there is no power?

I'm at a loss on where to look and what to try now

 

[GordoJay]

Yes

 

[Donmatteo]

Yes

I gotta agree with you. I can't follow what the question is and when the error is happening.

 

[Donmatteo]

Hey guys, so I have a 23 raptor with the 801a. Put the triple fog light kit and rigid rear lights on and working fine. Fogs are ran on fog switch, aux 1, aux 2. Wired the rears to aux 3 and nothing... the lights are on with red back lighting when approaching, Truck running and lights kick on when in reverse. I turned the aux 3 switch on and nothing happens. Checked the fuse and it's good, we checked the wire with the switch on and there is no power?

I'm at a loss on where to look and what to try now

I think you have it wired to both reverse and your running lights (which you are calling back lighting)

They should only be connected to the reverse lights and the lead going to upfitter 3 or just have them connect to the up fitter only and not into the rear harness.

 

[MurderedOutSVT]

 

[Turning Blue]

If I understand correctly, the white comes on in reverse, but not when you flip aux.3. I would double check that you used the correct wire for #3 by flipping the other switches. If it doesn't work, still confirm you have the correct wire, but also check your connection(s).

 

[F23 raptor]

If I understand correctly, the white comes on in reverse, but not when you flip aux.3. I would double check that you used the correct wire for #3 by flipping the other switches. If it doesn't work, still confirm you have the correct wire, but also check your connection(s).

Correct, white light comes on in reverse as it's supposed to. Flip on aux 3 switch and nothing happens

 

[F23 raptor]

View attachment 439624

Really not hard to understand, everything is plug and play and wired correctly. However, the aux 3 switch seems to have no power

 

[Nex]

@Turning Blue 's post is where I would start. Then I would check the wire you ran from the back to the front and connected to the uplifter wire.

 

[F23 raptor]

@Turning Blue 's post is where I would start. Then I would check the wire you ran from the back to the front and connected to the uplifter wire.

Did this, I used the SPV kit and everything is ran correctly. Now I'm wondering why my aux 3 doesn't show any power