Has Ford corrected the Cam Phaser rattle in Gen3?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

New recaros

FRF Addict
Joined
May 23, 2019
Posts
2,957
Reaction score
4,712
Location
Colorado
This cam phaser issue just won’t go away. I have not heard of a Gen 3 failure yet. I think Ford put this issue behind them.
 

dsiggi

Full Access Member
Joined
Nov 2, 2017
Posts
442
Reaction score
273
Location
Detroit
I did until the first cam phaser repair, then I turned it off at the beginning of every drive. Didn't seem to make a difference with the subsequent returning cam phaser problems.
Yea I was wondering about that. What you just said confirms what a good friend of mine just told me. He isn't a calibrator but worked on Raptor for a while. He didn't think start stop would affect it, because he said he was pretty sure the PCM remembers the position of the pistons during a start stop function and doesn't lock the pin.
 

Bud Dieselman

Member
Joined
Mar 5, 2023
Posts
5
Reaction score
1
Location
South Florida
My '18 had cam phasers replaced @15k, and 35k, and started the rattle again so I traded her in @ 50k miles for a '20. My '20's were replaced once @60k, it rattled for a good 10k miles before I had it done during which the computer fix was implemented but was already rattling. Finally traded her in @80k miles for my '23. First cam phaser fix took a month, second a week, the last on the '20 took 2 days. Would do it all again if I had to but I'm so glad they finally fixed the problem!

What was the build date of your ‘20?
 

shigman

FRF Addict
Joined
Jan 12, 2022
Posts
1,175
Reaction score
1,519
Location
Cypress, TX
Oh Lordy. I’d be a little suspect of the single post, joined today. Smurfslayer it might be time to get sighted in.
 
Top