Has anybody run the LVJ Motorsports relay panel?

[Oldfart]

I was wondering if anyone has installed an LVJ Motorsports relay panel on a current Gen 2 with LED headlights yet?
https://www.lvjmotorsports.com/product-page/gen-2-hi-beam-modified-relay-panel

 

[Booth9999]

Yep I’m running it.

 

[pastorwug]

Bought one just before Thanksgiving and works really well, so much easier than building your own relay box.
Nice guy who is a vet as well.

 

[Oldfart]

Yep I’m running it.

Bought one just before Thanksgiving and works really well, so much easier than building your own relay box.
Nice guy who is a vet as well.

What year Raptor? Are either of you running the high beam trigger wire without throwing any codes?

 

[pastorwug]

2018 SCREW, and no I'm not running the High Beam trigger, CA has real issues with that.

 

[Booth9999]

No I just use the switch bank to turn things on and off.

 

[Kmandoske]

Let me know if you have any comments. I'm here to help, Keith Mandoske 312-317-9444

 

[BrttClne22]

Let me know if you have any comments. I'm here to help, Keith Mandoske 312-317-9444

I think he's concerned with this post, Keith. I just ordered this panel last week so I was also curious what your thoughts were.

https://www.fordraptorforum.com/thr...ab-a-hi-beam-ground.76698/page-2#post-1492559

 

[bigtonyman]

I'm running the relay with the hi beam option and haven't had any issues with codes or anything like that.

Edit: I've got a 2018 802a screw. Not sure if it matters between years or not.

 

[WRCRaptor]

2019 High beam trigger hooked up. So far so good but as of now I am only running one set of lights (2 LP6s) but should be adding 2 more LP6s, XL Lasers & 20" OnX 6 in a month or so.

Keith is a great guy and very helpful, he has a lot of these out there with great results if you are having a problem call him.