Great deal on Borla 140404 Touring price

[Raven13]

Ricks is dead on about exhaust install, too easy to pay somebody. My wife who is 5'1" and petite helped me install my bumper so that's doable too. You'll take great satisfaction in doing the work yourself!

 

[dingo]

Ricks is dead on about exhaust install, too easy to pay somebody. My wife who is 5'1" and petite helped me install my bumper so that's doable too. You'll take great satisfaction in doing the work yourself!

I will buy the tools tomorrow and man up .

 

[03Cobraraptor]

Don't see free shipping option?

 

[dingo]

Don't see free shipping option?

I called them, ordered by phone, shipping around $150 but because I am in central Florida would be only$50 and i told him that I was going to pick it up in the store in order to waive the shipping fee. He then called me back and said that he got this deal from the distributor of free shipping to them and was able to pass that along to the costumer(me), asked for my address and told me that should be delivered by wednesday UPS 2nd day signature required. This is the email from the invoice (try it) [email protected]

 

[Raven13]

I will buy the tools tomorrow and man up .

Cool, it'll be fun!

 

[Wolff]

Nice price, also the S type is down to 909$ through borla
https://www.borla.com/products/f150...idson_catback_exhaust_stype_part__140383.html

 

[dingo]

I didi it,took almost 3 hours at home with basically no equipment except the tools described below. For future reference needed equipment:
1) 3/8” Drive Ratchet
2) 3/8” Drive Extension 3” (didn't used it in my case)
3)13mm and 15mm Deep Well Socket
4) Exhaust Removal Pliers(a must, $20, to be used for 10 seconds) vs a pry bar
5) from AutoZone the part#440600A (M10-1.50 class 8.8 HEX nuts) and the part#002740 (M10 class 10.9 flat washers) not included in the borla exhaust kit, I reused the bolts from the stock muffler assembly, if not you need to buy 2 new screws.
6) WD-40 or equivalent lubricant.
7) flat screwdriver
8)glasses and gloves
9) remove the spare tire and lift with the jack from the rear end.
10) 2 people required to do the job.

 

[EricM]

Nice. Bumpers and lights are next. Bumpers are cake, just need some muscle to hold it while you bolt it. 12V lighting is easy too, especially when Ford has done 85% of the work for you with the upfitter switches.

 

[ARH1956]

I know my limitations lol but thanks for the suggestions and don't even have the tools so I will look around as in youtube and internet most installations of the Borla is less than 2 hours . Im waiting to get the A.D.D. Honeybadger front and rear bumpers(should be delivered in 1-2 weeks) and i was thinking about this shop to install them but I don't even want to ask for a quote for the bumpers plus 40"led bar+ 20" bar+2x10" lights+ 2 duallys, but thats a lot of electric components and need a reputable source to install it for my peace of mind.

---------- Post added at 03:14 PM ---------- Previous post was at 03:13 PM ----------

There should be places around here for less than $150 to install, will search and make some phone calls for pricing, $600 for an exhaust install is ridiculous.

$600 is not a bad price, if they are building and installing a SS exhaust system. It is a crazy price to remove and install only!

 

[Ocbuckeye]

Anyone with a supercab have their extension pipe? I'm looking for one as I'm going from a scab to a screw and I can't find the thing.


Sent from my iPhone using Tapatalk