GJ Motorsports 3rd Brake Light - Opinions Wanted
- Thread starter 04Ram2500Hemi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
+1
Not cheap but well worth the money if you need a great antenna mount and dust lights for a run (or any offroading with one or more other trucks really). Plus a way brighter cargo light and appears to be a better gasket.
BlueSCrew19
Member
I just got back from an EXO club run and I noticed that around half the Raptors there are sporting the GJ Motorsports third brake light. I've had one since shortly after getting my Raptor, and it has done exactly what it promised to do, without fail, through many offroad adventures.
I found it a little bit of a PITA to install, as you have to fish your antenna wire through the headliner. I tried doing that without fish tape, and eventually succumbed to buying a roll at my local Home Depot. That did the trick. Unless things have changed, the little doohickeys that you mount for the screws are also a pain: hard to attach, easy to lose and definitely easy to scratch up the paint something fierce.
I found it a little bit of a PITA to install, as you have to fish your antenna wire through the headliner. I tried doing that without fish tape, and eventually succumbed to buying a roll at my local Home Depot. That did the trick. Unless things have changed, the little doohickeys that you mount for the screws are also a pain: hard to attach, easy to lose and definitely easy to scratch up the paint something fierce.
Morrisabm
Active Member
Great product buy it now if you off-road!
Nex
RIP CoronaRaptor
I have installed one, but can not find the pass through wires at the passanger kick panel. I have other lights wired to the uplifter switches and wanted to have the ambers up there as well.
I didn't use the supplied retaining clips and instead used some 10-24 well nuts. Works with the supplied bolts.
I didn't use the supplied retaining clips and instead used some 10-24 well nuts. Works with the supplied bolts.
Attachments
Nex
RIP CoronaRaptor
Attachments
Similar threads
