Gen 3 Ride Heights

[BoostCreep]

Hi All, can anyone who has taken delivery of a Gen 3 please post up some ground to fender measurements, both for 35 trucks and 37 trucks?

Really curious how these numbers compare to Gen 2. Thanks!

 

[Raptor37]

What are the Gen2 numbers?

 

[Stan G]

I've been asking for this in all of the picture threads.

 

[PlainJane]

While you are at it, can you measure the wheel well at the bottom. My 19 is just under 40" total. The 37s look bigger as the space from the tire to the flare is about the same as my 35s.

 

[Raptorlaw]

I'm just under 43.5" rear and 42" front on the 37s.

 

[BoostCreep]

What are the Gen2 numbers?

My ‘20 has stock suspension and tires. Front sits at 40.5 and rear at around 42 depending on how full the gas tank is. Driver rear is usually about .25-.5 lower than the passenger rear.

 

[BoostCreep]

While you are at it, can you measure the wheel well at the bottom. My 19 is just under 40" total. The 37s look bigger as the space from the tire to the flare is about the same as my 35s.

This would be nice to know as well.

 

[Raptor37]

I'm seeing just under 43" rear and 41.5" front on the 35s.

1/4 tank noone in cab.

 

[PlainJane]

On a 37, what is the distance from the tire to the flair in front and rear of the rear tire?

 

[RobBob]

I just purchase my Gen3 used (10,000) miles... I was curious about the level and also wanted to answer your question... but it brings up a question for me. Mine sits level. 40-3/4 front and back.. It looks level too. But, Im surprised there is not more rake in it. Any opinion? I feel from the factory, it should be 1-1-1/5 higher in the rear. I do have the LEER folding panel bed cover and a spray in liner... but that measurement is with the truck empty otherwise.