GEN 3 Official Aftermarket Wheels Thread

[9AND3 Wheels]

Me too, definitely don't have +25 for F150 Raptor, I'd be ordering Bronze + Black Rings if so.

At 9AND3 we can do whatever offset you want, and we can easily do bronze with black rings. If you want +25 we can make it happen. Shoot me an email and I can help. [email protected]

 

[pnwobrigade]

Your wheels have definitely been on my radar! I will hit you up for some options on finishes/offsets/etc here soon!

 

[Rob O]

It’s taken more than a year, but I finally found a set of wheels that tick all of my boxes:

FP Forged FP3-SL ... 17x9 +12 fully machined

Will post pics on the truck once these are installed (looking like mid-March)

With install of my FP Forged FP3-SL scheduled for tomorrow, I thought I'd circle back with a quick weigh-in.

TL;DR ... 29.5 lbs*
*with simulated rings installed -- i.e., all hardware -- and center caps

Of note:

• I weighed this wheel on two different scales
• I weighed it both while holding it as well as just the wheel on the scale (wasn't sure the latter would work or be totally accurate, but it did/was)
• While holding it, I weighed myself first of course, cleared the scale to 0.0, then got back on with wheel in hand (did both a "in front of chest" and "over the head")
• I did two weigh-ins on each scale
• Prior to weighing anything I used a 10-lb dumbbell to test accuracy of each scale (i.e., get a baseline) ... and both read exactly 10 lbs
• In every instance -- weighing the wheel holding it or on the scale alone -- it came in at 29.5 lbs

I have not weighed my OE 17-inch bead lock capable wheels. A quick search shows this wheel is pretty much universally reported to be right at 37 lbs. After install of the FP Forged SL-3s, I will weigh my factory 35 setup (BLC wheel + OE 315/70/17 KO2s) and see how it compares to the FP Forged + OE 37s (35x12.5 17 Load Range C KO2s). My factory tires have just under 30k miles (90% highway), so I'll also note remaining tread depth.

 

[FP Forged]

A few FP updates.
- Polished with or without powder clear is new finish option.

- The NL wheels are in production. I will have a 17x9 +18 Matte Gunmetal and 20x9 Matte Blk coming for stock. We were able to keep a good amount of concave with the +18. Engineering says the 17x9 should come in around 21-22lbs. I’ll weigh them when they’re complete.

- Street Lock and Classic lip wheels are available to order 17x9 or 18x9 +24 and will keep a similar lip depth. The “lug cup” will be more shallow but lip will be similar.

- Shop pay powered by affirm is available to use on your purchase if you don’t want pay the full amount up front.

- Not so new but I don’t think I mentioned it here but 10% off for first responders and military through GovX