GEN 3 Official Aftermarket Wheels Thread

[Ta2punk]

So I've never bought any kind of after market wheels ever for a vehicle. I'm about to buy a set of matte black Method 705's for my 22MY. I plan on getting them in 17x8.5/6x135/0/4.75, the Method site doesn't have a raptor selection just a general F-150 size selection. Excluding the 0 offset (which I want) is this the correct size?

 

[Pacific Wheel]

So I've never bought any kind of after market wheels ever for a vehicle. I'm about to buy a set of matte black Method 705's for my 22MY. I plan on getting them in 17x8.5/6x135/0/4.75, the Method site doesn't have a raptor selection just a general F-150 size selection. Excluding the 0 offset (which I want) is this the correct size?

+00 gives you 1.3” wider stance per side. +25 is closer to stock. But both do fit

If you want a nice discount on those Methods I know a guy

 

[wreckitshaw]

lets see some more pictures of that bumper

 

[Kurator]

@Kurator a few last pics for you. The customer went with the 1.5" collars and it's really close to clearing. Still gets a very slight rub if the angle of the tire is just so but so little that once the tires wear a little it'll probably go away. Given this info, you'll probably want to do a more positive offset for clearance since you don't want to raise it.

View attachment 408501View attachment 408502

holy cow. yeah 22 is kinda too big for me lol.
thanks for all this info bro.

 

[Kurator]

@Kurator a few last pics for you. The customer went with the 1.5" collars and it's really close to clearing. Still gets a very slight rub if the angle of the tire is just so but so little that once the tires wear a little it'll probably go away. Given this info, you'll probably want to do a more positive offset for clearance since you don't want to raise it.

View attachment 408501View attachment 408502

So hus problem not the fenders, but liner inside the wheel well, correct?

 

[Pacific Wheel]

So hus problem not the fenders, but liner inside the wheel well, correct?

Correct. Just plastic fender liners. Easy to cleanly manipulate at the right shop.

 

[ZorroV]

Fuel Cycle D-832 wheels, 17x9 +1 offset using the stock KO2 tires

 

[FP Forged]

New Y spoke is cut and headed to powder. 12 spokes are being finished today and then headed to powder as well.

View attachment 0197b783ad268ec6d25d1c637d6d948e.mp4

View attachment aec6f127c96d116921865cc0f6915cf1.mp4

 

[dillard09]

New Y spoke is cut and headed to powder. 12 spokes are being finished today and then headed to powder as well.

View attachment 408899
View attachment 408897
View attachment 408898

Damn!! Those look so good!!

 

[mts]

Y Spoke looks really good!