Gen 2 upfitter switches - None light up and no power

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joshua Krueger

Full Access Member
Joined
Jul 28, 2020
Posts
102
Reaction score
78
Location
texas
Accidentally posted this in the Gen one forums earlier. Does anyone know of one relay that powers all of the aux switches? Mine don't light up at all when the car is on and they don't have any power at the wires.

I have 2 rigid 360s installed on my apillars ready to roll just need the switches to work lol.
 

4rdFan

Full Access Member
Joined
Sep 4, 2019
Posts
236
Reaction score
264
Location
Michigan
There are two sets of wires, one set is just pass-through from the engine compartment to the interior and another is the hot set of wires. The supplement is wrong when it differentiates between the hot and pass-through. Reference this post for the correct set of wires to hook up to (in your case, the hot set): https://www.fordraptorforum.com/threads/aux-switch.79018/#post-1539846
 
OP
OP
Joshua Krueger

Joshua Krueger

Full Access Member
Joined
Jul 28, 2020
Posts
102
Reaction score
78
Location
texas
There are two sets of wires, one set is just pass-through from the engine compartment to the interior and another is the hot set of wires. The supplement is wrong when it differentiates between the hot and pass-through. Reference this post for the correct set of wires to hook up to (in your case, the hot set): https://www.fordraptorforum.com/threads/aux-switch.79018/#post-1539846

Thanks, I found both and have tried both. But the switches themselves inside the truck do not light up at all.
 
OP
OP
Joshua Krueger

Joshua Krueger

Full Access Member
Joined
Jul 28, 2020
Posts
102
Reaction score
78
Location
texas
Just an update, I went out with a circuit tester and none of the upfitter fuses are even getting power to them. WTF. Checked the console where the switches are and theyre plugged in. There has to be something Im missing.
 
OP
OP
Joshua Krueger

Joshua Krueger

Full Access Member
Joined
Jul 28, 2020
Posts
102
Reaction score
78
Location
texas

Proflyer

FRF Supporting Member
Supporting Member
Joined
May 21, 2020
Posts
336
Reaction score
355
Location
Denver
I checked all the upfitter related ones and fuses are all fine, but there isnt any power going to those fuses. So somewhere something is not connected. Gonna take it to the dealer tomorrow.
FWIW the layout of the fuse block compared to the manual is sort of funky. I had one switch that wasn't working and I swore the fuse was good. Once I figured out how the legend is actually laid out, I found the fuse that was blown. And I'm a car guy with lots of experience working on stuff from '55 to present. May be worth another look. Not sure what feeds the 'block' of the switches, but maybe that is blown or even missing.
 
OP
OP
Joshua Krueger

Joshua Krueger

Full Access Member
Joined
Jul 28, 2020
Posts
102
Reaction score
78
Location
texas
So because I already wired the light into it the dealer says they cant look at it or warranty it because it wasnt done by ford...... And they're trying to charge me a a diagnostic fee.

Going to pick it up now.
 
Top