Gen 2 Upfitter Switch Tailgate Release Kit

[j3ff]

Check "page #1" on this thread! all info is there!

If you have any questions, feel free to PM

thanks! found it and already ordered the kit.

 

[Ruby]

thanks! found it and already ordered the kit.

On its way! [emoji1598]



Sent from my iPhone using Tapatalk

 

[j3ff]

On its way! [emoji1598]



Sent from my iPhone using Tapatalk

right on, brother; appreciate you!

 

[Khamis]

***Only works with 2017 802A Models and Raptors with the electronic tailgate release***

As we all know now, the remote tailgate is awesome. But its annoying not being able to "pop" the tailgate from inside the truck. This is why I researched and developed this very easy to install kit to solve that problem. This kit allows you to use one of your upfitter switches as your tailgate release! Just a simple toggle back and forth and "POP"!


This kit works by using the empty pin in the body control module harness that is set aside for a trunk release button in the Ford sedans. In most instances, Ford vehicles share the same parts on most electrical components. In the F150s case, this pin was left empty because we don't have trunks, but a tailgate. Once tapping into this pin on the body control module, we have the exact same concept of operation as the Ford sedans and their interior trunk release system use. my kit is designed to use your factory upfitter switch in lieu of the truck release button!

This modification behaves exactly as a trunk release button in a Ford sedan would. Meaning, it will not function while the Truck is moving. It will only function if the truck is in accessory mode or turned on. The system cannot be damaged by leaving the upfitter in the on position either. This is a modification that operates as an OEM system would.

FAQ:
Qoes this modification require permanent modification to my vehicle?
A: No. Zero factory wiring will need to be cut or spliced (aside from the upfitter switch wires)

Q: How long will this take to install?
A: Approx 30min. Less time for some who is experienced with following simple instructions and the use of a wrench (haha).

Q: Will leaving the upfitterswiatch on cause damage? or overload the tailgate actuator?
A: No. Absolutely not. By flipping the up fitter ONE single signal is sent to "pop" the tailgate, after this signal is sent no more power will be sent to the tailgate.

Q: Will this modification work while the vehicle is in motion? While the vehicle is powered off?
A: No. This modification will only work when the ignition is in the ACC/ON/RUN position and the vehicle is not moving faster than 1MPH, regardless of gear selected.


$25 Shipped via PayPal Goods and services
(Please add $6 for international shipping if outside USA).


Each kit Includes:

-DETAILED, PRINTED FULL COLOR INSTALL INSTRUCTIONS
-All required wiring and relay. Everything is prewired and labeled for ease of installation.
-Wire ties and heat shrink tubing to insulate and secure splices.
-This kit requires ZERO cuts or splicing into factory wire harnesses and takes less than 30 minutes with basic tools to install. (Connecting to upfitter switch wires is required)



ORDER HERE
PayPal: www.paypal.me/BrendanWebster911/25
Please ensure to leave shipping address!

Amazing product. Need to order more then one piece. How can I do it ? International shipping thou


Sent from my iPhone using Tapatalk

 

[Ruby]

Amazing product. Need to order more then one piece. How can I do it ? International shipping thou


Sent from my iPhone using Tapatalk

Shoot me a PM on here, or an email and we can figure things out! [email protected]

 

[Ruby]

Confirmed to work on 2019s!

 

[leftie712]

Confirmed to work on 2019s!

Is wiring the same as on 2018?

 

[Ruby]

Is wiring the same as on 2018?

Yes!

This kit fits 2017-2019s all the same.

2017s has different wiring coloring than the 2018/2019s. Both wiring diagrams are included in the instructions.


Sent from my iPhone using Tapatalk

 

[leftie712]

Yes!

This kit fits 2017-2019s all the same.

2017s has different wiring coloring than the 2018/2019s. Both wiring diagrams are included in the instructions.


Sent from my iPhone using Tapatalk

Great, I bought it for 2018 but decided to wait for 2019, so I am all set.

 

[Ruby]

!!!! BLACK FRIDAY AND CYBER MONDAY SALE!!!!!

Order in the next two weeks and mention “Black Friday” in your PayPal notes, and I will hand draw you a picture of a Raptor on your shipping envelope!!! Completely FREE!!!


Sent from my iPhone using Tapatalk