Gen 2 Returning to stock (ADD bumper, Fox 3.0's, RPG Bump Kit, Deavers...etc)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Codyw

FRF Supporting Member
Supporting Member
Joined
Aug 3, 2020
Posts
83
Reaction score
78
Location
Los Angeles, CA
Hey Guys,

Planning on returning my 2018 Raptor to stock in the next couple of weeks and thought I may aswell get the parts listed now.
I've only had the truck since last September and have periodically installed the parts over that period of time (5k miles). I've barely used this off road and when I say 'off road', I mean fire-roads and easy going trails, I haven't had the guts to try fast desert passes, whoops, jumps etc.

All parts are in very good condition and have less than 5k miles on them.

All parts can be shipped or picked up, located near LAX in Los Angeles.


$3500 - ADD Stealth Fighter Bumper with ACC relocate bracket and with 40" Rigid Radiance and 10" Baja Designs Amber combo - https://www.addictivedesertdesigns.com/2017-2020-ford-raptor-front-bumper-F111182860103/

$400 - RPG Steering Tie Rods, including boots(Fox Orange) - https://www.rpgoffroad.com/product/1-2-steering-tie-rod-kit/

$1200 - RPG Billet Upper Control Arms (Fox Orange) - https://www.rpgoffroad.com/product/billet-upper-control-arm/

$2500 - FOX 3.0 Front Suspension (Non live-valve) preloaded 2" to give the truck a levelled look.

$2500 - FOX 3.0 Rear Suspension (Non live-valve)

$1400 - RPG Stage 2 Bump Stop Kit (Includes Fox 2.5 Bumps) -
https://www.rpgoffroad.com/product/17-stage-2-rear-suspension-kit/

$1100 - Deaver Leaf Springs +3 SD - https://www.rpgoffroad.com/product/rear-leaf-springs/

$380 - RPG Billet Shackle +2" (Fox Orange) - https://www.rpgoffroad.com/product/billet-aluminum-leaf-spring-shackles/

$175 - Rough Country behind the grill light kit - https://www.roughcountry.com/ford-3...t-70702.html?find=2018-ford-raptor-4wd-739670

$ 100 - SDHQ A Pillar Light mounts - https://sdhqoffroad.com/collections...-ford-raptor-sdhq-built-a-pillar-light-mounts

20201226_122917.jpg

20200908_181450.jpg

20201226_122623.jpg

20201226_122714.jpg

20200905_162752.jpg
 

TXRaptor

FRF Addict
Joined
Sep 15, 2010
Posts
1,851
Reaction score
1,046
Hey Guys,

Planning on returning my 2018 Raptor to stock in the next couple of weeks and thought I may aswell get the parts listed now.
I've only had the truck since last September and have periodically installed the parts over that period of time (5k miles). I've barely used this off road and when I say 'off road', I mean fire-roads and easy going trails, I haven't had the guts to try fast desert passes, whoops, jumps etc.

Your Avatar says otherwise... LOL

Seriously, why are you removing the parts? Are you planning to try to sell it 100% stock?
 
Joined
Feb 23, 2021
Posts
7
Reaction score
17
Location
Northern Arizona
Envious of your setup there, I'm curios too about why you are stripping it back to stock.

When do you plan to start removing parts and are you doing it at a shop? I am interested in a few items and located in AZ. May be worth trip over for me.
 
OP
OP
Codyw

Codyw

FRF Supporting Member
Supporting Member
Joined
Aug 3, 2020
Posts
83
Reaction score
78
Location
Los Angeles, CA
Your Avatar says otherwise... LOL

Seriously, why are you removing the parts? Are you planning to try to sell it 100% stock?

Haha just a few doughnuts on the floor, that's about the extent of my skill level.

I'm in the middle of a fairly extensive house remodel so id rather liquidate it and use the cash elsewhere.
No it wont be 100% stock, it'll still have the method wheels, aftermarket running boards, and possibly the Trump sticker.
It has been super awesome to have around and it was fun, but it has also been a bit of a lemon, got most of the issues taken care of with the extended warranty, but there a few other little things that are frustrating. Also, like many other say, they're money pits. As you can see I've already dumped over 20k into the thing and that would've been better spent elsewhere.
 
OP
OP
Codyw

Codyw

FRF Supporting Member
Supporting Member
Joined
Aug 3, 2020
Posts
83
Reaction score
78
Location
Los Angeles, CA
Envious of your setup there, I'm curios too about why you are stripping it back to stock.

When do you plan to start removing parts and are you doing it at a shop? I am interested in a few items and located in AZ. May be worth trip over for me.

see previous reply to TXRaptor.
Depends, most likely have RPG do it, will have to check on their schedule. yep no worries, only a few hours drive for you.
 
Top