Geiser springs mid perch

[RennsportRaptor]

I’ve asked this before, but didn’t get any pictures: can I please see your trucks on mid perch with Geiser springs? Top pic is mine currently. Second is my dad’s when he bought it with a 2.5” level on it. I want that look but I’m not gonna use a leveling block.

I’m on mid perch with stock springs currently and want to lift the front a little more. I also want the ride a little bit stiffer. Mid perch is definitely better than low, but I like a stiff and well dampened ride. Shocks only have about 25k miles total, they’re not an issue. I want to do Deaver rears eventually too, but I’d like to see trucks with just the front springs and stock rears ideally. However, if you’re on Geisers on mid, drop pics and leave a review.

Thank you.

 

[Chewie]

Here’s mine on Geisers, although on the low perch, and deaver +2’s on the rear. Being a progressive spring, I believe they should be on the low perch not mid, but been known to be wrong.

 

[The Car Stereo Company]

i wouldnt do top perch. you have a 13/14. the torsen front diff was introduced in 2012 and anything top perch will be much more succeptable to broken axles.

 

[Jhollowell]

i have geisers on mid and deaver +3SD in the rear. i'll post a pic later today.

Also, your only option to raise the front is Geisers or Eibachs so why not just get the springs and try it on mid perch and if its too stiff or too high drop to low perch? I feel like everyone's truck is going to be slightly different. Since you want a stiffer ride anyway, just get them and adjust the perch to your liking.

 

[DavidL]

Geisers on low perch. All other suspension is stock.

 

[TomDirt]

This is what Geisers' website shows: a 2.5" lift with their Gen 1 coil springs on mid-perch, (with 37's).

 

[RennsportRaptor]

i wouldnt do top perch. you have a 13/14. the torsen front diff was introduced in 2012 and anything top perch will be much more succeptable to broken axles.

Yeah I don’t plan to do top perch.

 

[RennsportRaptor]

i have geisers on mid and deaver +3SD in the rear. i'll post a pic later today.

Also, your only option to raise the front is Geisers or Eibachs so why not just get the springs and try it on mid perch and if its too stiff or too high drop to low perch? I feel like everyone's truck is going to be slightly different. Since you want a stiffer ride anyway, just get them and adjust the perch to your liking.

That’s the plan. Just curious how they look. It’s one of the next couple things I plan to do.