FS: SPD turbo outlets, UPR catch can

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

MudLovingFJ

Full Access Member
Joined
Aug 29, 2019
Posts
148
Reaction score
102
Location
Orange, CA
Please send me a private message if you’re interested in any items.
Located in Orange, CA 92869

SPD turbo outlet adapters BNIB, opened the box for the pictures asking $170 shipped

UPR catch can, lightly used $320 shipped

Icon Vehicle Dynamics Attitude Adjustment collar kit. Collars installed for a few days, top hat spacers unused $SOLD

E86B8627-077B-454D-B577-CA12244F526B.jpeg DC91FA44-4AED-435E-ADF3-47A81BCF8833.jpeg B0EF6DE0-FE60-41C7-8742-7A8E85241FD9.jpeg CD0EDF0D-F7D4-445E-A224-1914051639FB.jpeg 83EF3FA5-1F48-459B-97DC-C8BF1104048C.jpeg
 
Last edited:

NightWolf928

Active Member
Joined
Jun 26, 2019
Posts
69
Reaction score
13
Location
Yuma, AZ
It comes with the WOT line, grommet, and fitting. You have to drill a hole in your passenger side turbo inlet per UPRs instructions.

I just wanted the option of keeping my OEM pipe and using UPRs instead in case I change my mind.
 

Black Bear

Member
Joined
Nov 2, 2019
Posts
5
Reaction score
10
Location
SC
I did it with a replacement pipe for same reason, so I could go back. I think cost an extra $100 for the tube. Be careful removing the OEM tube, there is a post midway down that goes into a grommet to hold it in place. It is a bear to get out and will break off (I will have to epoxy mine back on if I choose to go back ;)). If I had to do it again I would drill the hole and not remove the OEM tube. You can always plug it it or get a new tube later if you want to go back to stock.
 

NightWolf928

Active Member
Joined
Jun 26, 2019
Posts
69
Reaction score
13
Location
Yuma, AZ
I did it with a replacement pipe for same reason, so I could go back. I think cost an extra $100 for the tube. Be careful removing the OEM tube, there is a post midway down that goes into a grommet to hold it in place. It is a bear to get out and will break off (I will have to epoxy mine back on if I choose to go back ;)). If I had to do it again I would drill the hole and not remove the OEM tube. You can always plug it it or get a new tube later if you want to go back to stock.

I’ll take my chances lol does UPR sell the pipe separate?
 
Status
Not open for further replies.
Top