FS: C4Fabworks jack extension

[Deleted member 12951]

Selling this 6" jack spacer extension that works on a Harbor Freight 2 ton aluminum jack and might on other brands. Its been used and one side is bent some as shown in the picture but doesn't affect the performance.

$42 shipped

Link to the product for more info. New is over $85 with shipping.
6" Jack Spacer

 

[KaiserM715]

Approved.

 

[Yukon Joe]

Must not be compatible with the other size jacks. The website asks for a specific jack.

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[Deleted member 12951]

Must not be compatible with the other size jacks. The website asks for a specific jack.
[/url]

Its due to the hole size on it. The HF jacks have different size bolt that hold the pad down. This one is for the 2 ton that we all commonly use when on runs. I have no idea about other brand jacks, hence why I used the word "might". With some ingenuity practically anything can be made to fit/work.

 

[Yukon Joe]

I have the HF 3 ton I use in the garage. So if it's just the hold down bolt size difference, I could easily drill that out.

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[Deleted member 12951]

I have the HF 3 ton I use in the garage. So if it's just the hold down bolt size difference, I could easily drill that out.

I have that same jack too. If you are serious, I could see how it will fit beyond any drilling as there might be someone who wants it for how it works without modifying.

 

[Yukon Joe]

Thanks Rick. That would be great.
If it's simply drilling the hole larger, I'll probably take it.

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[Deleted member 12951]

Thanks Rick. That would be great.
If it's simply drilling the hole larger, I'll probably take it.

Well to confirm. I have the HF 3 ton STEEL jack that I just use in the garage. Is that what you have or is it the 3 ton ALUMINUM? The pads on the two types are different.

 

[Yukon Joe]

it's the aluminum

Vote for your favorite pic
http://www.fordraptorforum.com/f18/january-2017-calendar-vote-46906/
@Yukon Joe
Delta Lead
www.runraptorrun.com

 

[Deleted member 12951]

it's the aluminum

I just sent an email to Todd Gruner asking if all that needs to be done is to drill the hole bigger for that jack. I will let you know.