Front Axle Help

[CoronaRaptor]

OP, you order the axle yet? @Januch09

 

[GCATX]

Hey guys, I was installing a set of RPG’s on a ‘21 Raptor today and when I went to put the axle back in, the head bolt snapped off.

A new axle is on nationwide back order with no eta and i called every single ford dealer in the US and no one has one.

Anyone know of a shop that can replace the head of the axle with a new one so I can get this truck back on the road? Or does anyone know of someone with a wrecked 22 that is parting it out?

The parts # is: ML3Z3A428D

Thanks in advance!

Just a thought, you might try checking a regular parts store for a 2020 shaft. Put it side by side with yours and see if it will work for the time being, that is if they don't have one for a 2021. We bought a moog shaft for the 2010 at O'rielly, $120 or so. Where did the stud break? If it were me, I would weld that S O B back together and run it. lol.

 

[Januch09]

OP, you order the axle yet? @Januch09

Yes I actually got one today and got it in. Worked perfectly.

 

[Januch09]

Just a thought, you might try checking a regular parts store for a 2020 shaft. Put it side by side with yours and see if it will work for the time being, that is if they don't have one for a 2021. We bought a moog shaft for the 2010 at O'rielly, $120 or so. Where did the stud break? If it were me, I would weld that S O B back together and run it. lol.

Yeah i was honestly very curious if they were the same or not, but I just wanted to make sure it was teh right part. Thankfully I found one today, worked perfectly!

 

[FordTechOne]

Where’s the tHeY tOok oUr JoBs!!! guy at? He’s probably mad some Canadian distributor gets profits.

New guy/creepy p e d o bear guy...I suggest that if you have a personal issue with the data I provide, take it up with me in a DM instead of being a coward and calling me out in an irrelevant post.

 

[WestTXRaptor6]

New guy/creepy p e d o bear guy...I suggest that if you have a personal issue with the data I provide, take it up with me in a DM instead of being a coward and calling me out in an irrelevant post.

I usually support your posts but that is a dbag post. Get thicker skin if you are going to hang out on forums. Nobody is right all the time.

 

[FordTechOne]

I usually support your posts but that is a dbag post. Get thicker skin if you are going to hang out on forums. Nobody is right all the time.

Maybe I'm missing something here. I never claimed I'm "right all the time". It's not about "thicker skin'; new guy/nobody ped0 bear dragged me into something I never was even involved with in the first place.

 

[tedthebear]

New guy/creepy p e d o bear guy...I suggest that if you have a personal issue with the data I provide, take it up with me in a DM instead of being a coward and calling me out in an irrelevant post.

lol someone is clearly new to the internet and can’t take a joke…it’s ok that’s why they make safe spaces.

 

[zombiekiller]

lol someone is clearly new to the internet and can’t take a joke…it’s ok that’s why they make safe spaces.

hey FNG, slow yer freakin roll. If you start p1ssing on the shoes of repeated, valuable, contributors like @FordTechOne , no one will help you FOR FREE, like we tend to.

if you dont like the FREE advice, be our guest to go pay someone to help your rude, arrogant, ***.

 

[KevoUsmc]

lol someone is clearly new to the internet and can’t take a joke…it’s ok that’s why they make safe spaces.

It's very obvious he's not new to the FRF, you've been here what 5 months? He's been here over 2 years and extremely helpful to the community. So you take take it and shove it back to where you came from