Frame cut bumper: Cut-off wheel or Sawzall?

[The Car Stereo Company]

his best bet is a cordless dremel with the 2 inch disc. most accurate cuts that way

 

[Gorzz]

Wheel, all the way. Specific metal wheel wil be not only accurate but save time. Had both horns cut off in less than 20min, finished off with a bit of filling. Perfecto!

 

[Reaper308]

I may be biased but I definitely think you need an SVC bumper...

-Colin

NO Jeff is NEVER Bias! But I think the SVC is the one to use! Good luck on the cut.

 

[Canuck714]

Ive done Plasma, sawzall and a wheel.
I prefer the Cut Off wheel with a diamond tip wheel vs the abrasive compound disks.

 

[Sharpie69]

angle grinder 100%. if you're comfortable try and use a 7" cutting disc, makes easy work of it

7" is big on a 4 1/2" grinder, you're better off with 6"

 

[nealhoney]

7" is big on a 4 1/2" grinder, you're better off with 6"

Of course you’d think 6” is good enough

 

[Sharpie69]

Of course you’d think 6” is good enough

Yes, of course, she's just a little thing !!