Forscan Issue! Help needed!

[faceoff4]

Hey guys I am looking for some Forscan help. I made some changes over the weekend with the OBD Link MX on my 2017 Raptor and things were fine for a couple of days. But this morning I got a ton of error messages (like Hill Decent, etc) and the truck wont hardly move and doesnt change gears or anything. I can floor the gas pedal and nothing happens. Anyone experience this? The only things I changed were Disable Auto Start/Stop, Autofold Mirrors, Double Honk Disable, Fake Engine Noise Disable, Passenger Seatbelt Reminder off and Disable Door Ajar Warning Chime (although this one didnt work). Truck worked normal for a few days and this morning the issues happened. Anyone have something similar? Would returning it to As-Built fix it or did I do something wrong possibly?

Also of note is I do have Pedal Commander on my truck as well and I even tried changing those settings and nothing changed. Any help would be appreciated!

 

[Kanakry]

0 things you changed in ForScan have any affect on driving or driveablity.

I would remove the Pedal deal and recheck.

 

[faceoff4]

0 things you changed in ForScan have any affect on driving or driveablity.

I would remove the Pedal deal and recheck.

Thanks. Someone else mentioned that they have Pedal Commander and when they made Forscan changes that the same issue happened. So I think you may be right and I will try that. Thank you!

 

[WhatExit?]

Thanks. Someone else mentioned that they have Pedal Commander and when they made Forscan changes that the same issue happened. So I think you may be right and I will try that. Thank you!

Whatever happened here?

 

[faceoff4]

Whatever happened here?

I just disconnected the battery and reconnected it and everything was fine. It was an isolated time and I never have had an issue since. So try disconnecting the battery and that should hopefully solve the issue. Good luck!