New cover. Left the essentially idential old one on my trade...all new bed accessories too including the Ford tonneau, Ford F150 logo bed mat and Ford bed extender...this tonneau style is basically the Rev BakFlip flush mount tri-fold re-branded by Ford Accessories.
A nice thing about the new tonneau, it came with a set of pre-cut drain inserts for the front of the bed (saves drilling) and you can save the stock Linex'ed ones if you ever take it off.
Linex did the bed lining yesterday, and they did a great job. Shout out to Truck Works the Linex affiliate here in KC (Lee's Summit). One minor deal on the Linex, they masked and sprayed over the hole in the tailgate for the pin that goes down
the center of the tailgate extender when it is laying back on the tailgate...fairly easy to clean out the hole this am. Like how Linex takes all the hardware off/masks it off nicely. Had the Ford factory liner on the Gen 1. Nice, but I think the Linex is better...especially the tailgate, but that in part is due to the revised tailgate step handle design now (inside vs on the inside of the tailgate) so you don't have that plastic piece inside the tailgate like the Gen1 had. Basically, you can Linex the inside of the tailgate now vs. having that plastic piece like on Gen1.
Item of note, with the Linex and the bed mat in place, the only way to pin "lock" the bed extender is by removing the rubber "feet" on the stowed bottom of the extender...same deal as Gen 1 in this regard. Also threw in my box cleats. Think I documented the key in about half a dozen different places. I know I am gonna lose that key...btw, it's S03 lol.
