First time audio install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
delliott

delliott

Member
Joined
Jul 31, 2022
Posts
36
Reaction score
36
Location
Granite Bay, CA
Amp rack is in and working, however o noticed it’s only playing music from the drivers side speakers (nothing passenger side or rear) still running off a TOSlink from the ZEN to VX600/6i since I didn’t have any RCA’s… I’m assuming it’s a tuning issue with them amp?

Anyone have any suggestions or pointers would be greatly appreciated as I’m very new to this digital tuning and trouble shooting. IMG_8324.jpeg
 
OP
OP
delliott

delliott

Member
Joined
Jul 31, 2022
Posts
36
Reaction score
36
Location
Granite Bay, CA
It feels as if the balance and fade is some how just to the drivers seat in the amp settings, my head unit is still factory center
 

greatone99

Full Access Member
Joined
Aug 2, 2019
Posts
826
Reaction score
387
Location
ma
I have had zero luck getting audio out of any other speakers besides the drivers zone and sub.
running off a TOSlink from the ZEN to VX600/6i and I'm struggling to find any adjustment to resolve this issue.
I had that issue a few times, mine was I did not address the amp correctly
 
OP
OP
delliott

delliott

Member
Joined
Jul 31, 2022
Posts
36
Reaction score
36
Location
Granite Bay, CA
So after talking to Noah aka (@The Car Stereo Company ) and having one of Crutchfields TuN software’s specialists remote into my computer and verify the DSP is set up correctly it seems like it might be a wiring issue with the PAC harness. I just need to find some free time to use a AA or 9 volt to see which speakers “pop” when getting power.
It’s like the harness pins aren’t correct for the speaker I need to be playing.
 
Top