Fab Fours Bumper Questions

[ChevyChad]

Does anyone have a 360° camera view with the fab fours front bumper? From the pictures I've seen, it looks like the middle bar is slightly above the front camera so it may not interfere with the view. Just wanting to see if that is actually the case.

Also, does anyone know if they make a version with a winch instead of a 20" light bar in the middle?

 

[dude1782]

I'll get you pics later. The bar is right in the middle of the camera. You can see above and below the bar. Also @Gen2Raptor did a camera relocation to move it higher. Supposedly it was pretty easy.


Sent from my 2017 Raptor using Tapatalk

 

[ChevyChad]

Thanks. Pics would be very helpful for sure!

I did see the camera relocation that ADD posted and I'd like to avoid that if possible. I know the concept and perhaps the mod itself seem pretty straight forward, but I think that the finishing touches would be a PITA to deal with as far as getting a new grille that doesn't have the stock cam cutout location and also ensuring the 360° camera view lines up between the front and side cams.

 

[ChevyChad]

Still waiting for a pic...

 

[dude1782]

It's not my truck so I haven't been able to get them yet. By the end of the day I should have them.


Sent from my 2017 Raptor using Tapatalk

 

[dude1782]

Sent from my 2017 Raptor using Tapatalk

---------- Post added at 02:55 PM ---------- Previous post was at 02:43 PM ----------

Sent from my 2017 Raptor using Tapatalk

---------- Post added at 02:59 PM ---------- Previous post was at 02:55 PM ----------

Couple things to note:
1) the installer recommended getting the intercooler upgrade
2) My personal warning to you is that if you order the intercooler from add it will come with a large add logo visible through the grill. I would order it from full race.
3) the backup sensors automatically beep on the lowest setting now because of the rear bumper


Sent from my 2017 Raptor using Tapatalk

 

[ChevyChad]

Awesome pics and info! Thanks so much

 

[Addictive Desert Designs]

The 2017 Raptor Intercoolers are private labeled through us, cannot be purchased direct from Full Race. However, you can request to have no logo on the intercooler if you would like. We also have a black anodized option for the Intercooler itself.

 

[ChevyChad]

Figured id add another front/ 360 view. The one above is a bit misleading because it is taken just outside what looks to be a garage, so front view is hard to make out. So here is another pic for anyone who may be looking.

 

[kdub405]

Figured id add another front/ 360 view. The one above is a bit misleading because it is taken just outside what looks to be a garage, so front view is hard to make out. So here is another pic for anyone who may be looking.

Thought about moving the camera up?


Sent from my iPhone using Tapatalk