Expensive Exhaust Alternative

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DHW

Member
Joined
Nov 13, 2017
Posts
15
Reaction score
6
Inexpensive Rear Exit Exhaust Tips

Hey guys,

Just wanted to share my most recent mod. I've done a ridiculous amount of research on exhaust and almost more than the sound difference was I hated the look of the stock exhaust. I really liked the look of the Roush exhaust, but almost everyone says its too loud. As an alternative, I ordered a pair of black 6.2L stamped tips and had my local exhaust shop rework it so it looked similar to the Roush. Only $100 for the tips on eBay and $100 to have them installed. They cut the stock pipes just after they arch over the axle and welded in the tips.
 

Attachments

  • Pipes 1.jpg
    Pipes 1.jpg
    73.1 KB · Views: 112
  • Pipes 2.jpg
    Pipes 2.jpg
    73.3 KB · Views: 105
  • Pipes 3.jpg
    Pipes 3.jpg
    61.5 KB · Views: 98
  • Pipes 4.jpg
    Pipes 4.jpg
    39.2 KB · Views: 127
Last edited:

Aaron

Meme Corps Commandant
Joined
Jun 13, 2011
Posts
13,097
Reaction score
7,475
Location
WA
Only bad thing here is that if you take it in the dirt and exceed your departure angle your tips will get flattened. If you don't plan on doing that though, then who cares. Looks good!
 
OP
OP
DHW

DHW

Member
Joined
Nov 13, 2017
Posts
15
Reaction score
6
Only bad thing here is that if you take it in the dirt and exceed your departure angle your tips will get flattened. If you don't plan on doing that though, then who cares. Looks good!

True, but I've seen quite a few flattened and crushed stock exhaust on Raptors too.
 

Aaron

Meme Corps Commandant
Joined
Jun 13, 2011
Posts
13,097
Reaction score
7,475
Location
WA
True, but I've seen quite a few flattened and crushed stock exhaust on Raptors too.

Yep. I flattened mine when it was a side exit behind the wheels. The easiest solution is to dump it right after the axle. However, like i said, if you don't plan to exceed the departure angle then no need to worry.
 

Ruger

FRF Addict
Joined
May 16, 2011
Posts
9,555
Reaction score
8,514
Location
Northern Nevada
I don't get it. A "ridiculous amount of exhaust research" resulted in nothing more than the installation of a fancy pair of exhaust tips in a location where they could easily be damaged in real off-road use?
Huh.
 

AndysLog

FRF Addict
Joined
Jan 12, 2017
Posts
1,125
Reaction score
527
Location
Moro IL
i dumped mine before the axle, and on really deep water crossings the truck goes completely silent except for the bubbles. its amazing and i love it and it was free.
 
OP
OP
DHW

DHW

Member
Joined
Nov 13, 2017
Posts
15
Reaction score
6
I don't get it. A "ridiculous amount of exhaust research" resulted in nothing more than the installation of a fancy pair of exhaust tips in a location where they could easily be damaged in real off-road use?
Huh.

What I meant was I didn't want to go too loud so I looked into Magnaflow, Roush, Borla etc. and had settled on the Corsa Sport when I read a review that said it was no louder than stock, which didn't seem like a wise way to spend over $1000. I just decided to keep the stock muffler and resonator, but still wasn't happy with the look of the stock exhaust tips.

And seems to me that the location of these tips is no more "easily damageable" in a rear departure situation I assume you are describing than the stock tips.

Clear it up for you?
 
Last edited:

Fcfdw

Member
Joined
Apr 4, 2018
Posts
28
Reaction score
59
How loud is "Really Loud"?
Ive got the MBRP Dump (no resonator) and it's not loud at all. I was actually kinda disappointed. The fact is you can't get it all that loud with the factory cats installed. I guess its all a matter of personal opinion but after a couple of muscle cars and a diesel with 5" and no muffler this truck is quiet.

Maybe my cats are clogged who knows?

Tips look good though might be even cooler when they're oval.:favorites13:
 
Last edited:
Top