ETIS indicative of retrofit?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

taco-13

Full Access Member
Joined
Sep 22, 2015
Posts
655
Reaction score
396
Location
Long Island, NY
If you click vehicle and then click Resolved publications, enter vin, do you get Diagnostic (14) under the results?
 

taco-13

Full Access Member
Joined
Sep 22, 2015
Posts
655
Reaction score
396
Location
Long Island, NY
Darin has confirmed he has a hold for the retrofit. See what his results are. If they are the same all of this means nothing to the hold I guess.
 

aidan138

Member
Joined
Jul 30, 2016
Posts
22
Reaction score
22
Location
cleveland ohio
They bump back and forth between red and green all the time. I actually think its more of a Ford Computer issue than anything.

I read the same thing as poison123 on the ford focus forum. Got the impression that the green or red GOASIS had more to do with communication between that system and ETIS. But I don't work with either of those systems
 

03'Darin

FRF Addict
Joined
Sep 9, 2016
Posts
1,056
Reaction score
784
Location
Harrisburg Pa
Darin has confirmed he has a hold for the retrofit. See what his results are. If they are the same all of this means nothing to the hold I guess.

My truck shows no campaign messages and a green block.

Our first Raptor that was built 10/17 shows a green block but has been showing sent off site since 11/28 and status of "in production".

Just out of curiosity I checked on a 17' Super Duty that's been sitting at the ramp since 10/11. It also shows a green block.

So I'd say the red green thing doesn't have any indication of vehicle status.
 
Last edited:

bdub85

Full Access Member
Joined
Oct 16, 2016
Posts
144
Reaction score
85
I read the same thing as poison123 on the ford focus forum. Got the impression that the green or red GOASIS had more to do with communication between that system and ETIS. But I don't work with either of those systems

Being a software guy, that makes the most sense. If you see a red block, it's probably because ETIS is having an issue communicating with GOASIS.

I don't see them putting any info related to retrofits on non-released vehicles. Post production things go on there like recalls.
 

Dredlin

Full Access Member
Joined
Sep 17, 2016
Posts
104
Reaction score
47
Location
NW Pa.
If you click vehicle and then click Resolved publications, enter vin, do you get Diagnostic (14) under the results?

I get Diagnostic (14) as well when I entered my VIN. But my truck isn't built yet.
 
Top