Eibach ref number

[Max FR]

Hi, could someone who’s running Eibach coils check the reference number on them please. Mainly the two letters next to the Eibach label. I have H/W and not sure of the meaning and even if it’s the right coil ! The numbers are 313504201FA and I think they are correct.
Problem is the truck sitting at 4’ with Eibach on low perch and well mounted, so I am wondering if it’s not a part issue, wrong coil for that 2013 raptor

 

[Bozz]

The ones I have are -

Model: EIB-E30-35-042-01-20

Printed on spring: 31 35 037 01 FA

 

[Max FR]

Whaou very different than mines ! Humm wondering if that’s really significant then.
Thanks

 

[Bozz]

Whaou very different than mines ! Humm wondering if that’s really significant then.
Thanks

If you're up 4-inches on low perch, you must have the wrong coils.

 

[myersroofer614]

Hi, could someone who’s running Eibach coils check the reference number on them please. Mainly the two letters next to the Eibach label. I have H/W and not sure of the meaning and even if it’s the right coil ! The numbers are 313504201FA and I think they are correct.
Problem is the truck sitting at 4’ with Eibach on low perch and well mounted, so I am wondering if it’s not a part issue, wrong coil for that 2013 raptor

My numbers I bought off the street match yours with hw never to the eibach logo

 

[myersroofer614]

My numbers I bought off the street match yours with hw never to the eibach logo

eibach hw
313504201 fa

 

[joshwells357]

Mine are
EIBACH I/R
313504201FA
im having this same issue, I cannot find this sequence of numbers anywhere else but this thread. Any info, or a follow up on this?

 

[clop30]

anyone having any problem running this model coil? I got them off Fb as well for 100 bucks and if it’s not a huge issue‍

 

[Bozz]

anyone having any problem running this model coil? I got them off Fb as well for 100 bucks and if it’s not a huge issue‍

???

 

[clop30]

313504201FA This is the number I got on my coils. If no one has had a problem with it. I’m going to install.