Eibach Pro-lift springs installed with pics and comments

[Wfo]

You’ll be fine if you don’t jump it. I have 37s and trimmed pinch weld on firewall and McNeil 2+2 front fenders. I have same springs as you with Svc bumpstops and rpg drop shackles. I’ve jumped my truck too many times to count.

 

[OneFastSicilian]

Looking to have these installed on my newly acquired 2017.

How's the ride quality compared to OEM?

 

[K223]

If you change out the front springs just make sure to run the ride height adjustment. You can use Forscan and do it yourself. This only applies for the live valve shocked truck’s ‘19-‘20.

 

[Quaesta]

I do believe that most people in here who have gone that route have not been thrilled. Why not just order a new one with 37’s?

 

[Wfo]

I did 37s on my 18 and I love it!!! Truck feels the way it should with 37s

 

[WAC]

Last week I had some fuel wheels +1 off set wrapped in 35” 12.5 Nitto Ridge Grapplers on my 18. I have the Eibach springs and was looking to have them installed on Thursday along with alignment. I DO NOT want to dive into rear springs etc….But after reading some of these post I would have to after installing front springs unless I want the front of the truck aimed at the sky.
Anyone install the front Eibach springs only and just left it alone without it being nose high?
I just want the thing closer to level is all. Seems like this topic has been beat to death and I may not know until they are installed since so many folks have different outcomes.

 

[Scott Haydon]

Last week I had some fuel wheels +1 off set wrapped in 35” 12.5 Nitto Ridge Grapplers on my 18. I have the Eibach springs and was looking to have them installed on Thursday along with alignment. I DO NOT want to dive into rear springs etc….But after reading some of these post I would have to after installing front springs unless I want the front of the truck aimed at the sky.
Anyone install the front Eibach springs only and just left it alone without it being nose high?
I just want the thing closer to level is all. Seems like this topic has been beat to death and I may not know until they are installed since so many folks have different outcomes.

I have a 2020 and just had the eibach springs up front installed. It sits perfectly level at the moment. Now it's only been a week and they'll probably settle a 1/4" or slightly more, but it would be still pretty much be level. Now I understand the '17-'18 eibach springs raise you up about 1/2" more than us live valvers, but after settling it should be damn near level, unless you've worn out your rear springs somehow.

 

[K223]

My springs never settled. Was dead level from day one and still level well over a year and a half later. You should be good to go.

 

[WAC]

Went ahead and had them installed it’s level. very Glad I did this.

 

[ArmedRawbry]

Had the Eibachs installed on my ‘17 today, what a difference! Best mod by far to date!