Driver seat cushion popping off clip

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jack55

Member
Joined
Dec 6, 2021
Posts
32
Reaction score
14
Location
United States
Just revisiting this, how did you guys go about putting the metal clips on? I tried clipping them onto the plastic first then going about trying to clip it onto the seat but it doesn't wanna clip cause it end up being so tight lol. I'm not sure if I'm just doing it wrong?
 

Hagasan41

Full Access Member
Joined
Dec 15, 2016
Posts
247
Reaction score
215
Location
Florida
Finally tacked this today! I ordered the clips a couple years ago, better late than never. lol

What a PITA! Tip... you'll need to slightly expand the metal clips so they slide over the plastic retention clips and remove the seats so you aren't twisted like a pretzel.

Gave it a little interior detail since I was in there. So fresh and clean, ready for the next Starbucks run!
 

Attachments

  • tempImageyYpttc.png
    tempImageyYpttc.png
    1.5 MB · Views: 6
  • tempImage88RXhm.png
    tempImage88RXhm.png
    1.7 MB · Views: 6
  • tempImageKRKZ3d.png
    tempImageKRKZ3d.png
    1.8 MB · Views: 6
  • tempImageSCA66Y.png
    tempImageSCA66Y.png
    1.4 MB · Views: 6
Top