Dirt/flakes in coolant 2011 Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WillB170

Member
Joined
Apr 18, 2024
Posts
5
Reaction score
4
Location
VA
Hi all, I have a 2011 gen 1 with 160k. Haven't had it too long, but noticed a sweet smell coming from the engine bay and after taking a look my coolant was low and also looked like this (see pic below).

I took it to get flushed, but still pretty concerned about the flakes. It looks fine now with the flush, but I’m leaning towards a few reasons

- previous owner tried some sort of sealant
- bad oil cooler
- head gasket? No overheating/coolant in oil/white smoke or drivability issues..

Does this look like oil, or was it just super dirty? Shop said from their record, it hadn’t been flushed since 2013.

Just trying to gauge how concerned I should be lol. Any suggestions would be great.


9847F00F-668E-4419-A7FB-521A56D30CCE.jpeg
 

rschap1

FRF Addict
Joined
May 5, 2022
Posts
1,312
Reaction score
1,483
Location
Lowell MI
First guess would have been Stop Leak from description.
But looking at picture, maybe not.
Looks like there may be a couple things mixed in there.
If flushed good and stays good, then I wouldn't be too concerned knowing it has been a long time since serviced.
And not knowing what may have been added.
Just get it clean and keep an eye on it.
If something returns, then I would investigate further.
 

mprice1234

SVT Gen 1 Rules
Joined
Oct 26, 2010
Posts
5,328
Reaction score
12,051
Location
Colorado Springs, CO
Looks like long overdue coolant, now that you have done the flush you should be good. You may want to do another flush in a year just to really get it cleaned out.
 

rschap1

FRF Addict
Joined
May 5, 2022
Posts
1,312
Reaction score
1,483
Location
Lowell MI
Don't know if it is still appropriate and applicable for newer vehicles, but...
Used to be if worried about really cleaning cooling system "Prestone Minute Flush" could be used.
I have mentioned it to a few folks in past few years and doesn't seem like anyone has ever heard of or recalls it.
Believe it was acidic and helped clean out cooling system beyond clean fresh water.
Maybe newer materials don't tolerate the harness.
Or the ingredients aren't "safe" anymore.
But if it turns out that the contamination returns, maybe some cleanser/cleaner like that would help with a "deeper" clean if needed.
Hopefully not needed, but something to check out if re-occuring.


 

Attachments

  • Prestone.jpg
    Prestone.jpg
    130.3 KB · Views: 2
Top