GEN 2 Did you order a SVC offroad by Mojave Front Bumper?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

zombiekiller

OG BooBooRunner
Joined
Sep 24, 2017
Posts
2,793
Reaction score
3,842
Location
New Orleans
I didnt order one, but I was able to check out one of the samples at their shop.

the rear bumper that hasnt been released yet was in sample stage too. I thought it was pretty rad. retained the parking sensors too.
 
OP
OP
C

conflict

Active Member
Joined
Nov 24, 2015
Posts
60
Reaction score
23
it's a great looking piece for sure. i look forward to receiving mine.
 

dleclerc27

Active Member
Joined
Apr 1, 2024
Posts
54
Reaction score
42
Location
Boston, MA
I’m going to pick this thread up as I consider buying the Mojave front - I’m in an 18 802A screw. I installed the upgraded Cobb IC and I imagine this works with the mojave front bumper? Their site says you must run the SVC IC, but I don’t know if it’s a big switch (?). I want to make sure the adaptive cruise control is also maintained and I need to put a plate on front (thanks, MA). I’ll ask the guys at SVC, but didn’t know if anyone had any insight here. Thanks!
 

ilikebmxbikes

Member
Joined
Apr 22, 2023
Posts
16
Reaction score
32
Location
Northern California
I’m going to pick this thread up as I consider buying the Mojave front - I’m in an 18 802A screw. I installed the upgraded Cobb IC and I imagine this works with the mojave front bumper? Their site says you must run the SVC IC, but I don’t know if it’s a big switch (?). I want to make sure the adaptive cruise control is also maintained and I need to put a plate on front (thanks, MA). I’ll ask the guys at SVC, but didn’t know if anyone had any insight here. Thanks!
id call SVC. Different intercoolers mount slightly different and have different piping -
 

dleclerc27

Active Member
Joined
Apr 1, 2024
Posts
54
Reaction score
42
Location
Boston, MA
I did reach out to the team at @svc about some questions regarding the Mojave front bumper and they responded very promptly. I had three questions, which they addressed quite clearly. For whoever else may be interested in this, here are the (semi-abbreviated) questions and (shortened) answers and SVC's exact response in quotes:

1.) 2018 802A SCREW - can I keep the adaptive cruise control?
- Short answer: Yes.
- Per SVC: "We manufacture adaptive cruise control relocation brackets that you can use to relocate and retain adaptive cruise control." *Note - they said there is no direct link for that relocation bracket, but the cost is $150 and they'll incorporate it into the invoice for the bumper, should I choose to get it.

2.) I have the upgraded COBB IC, will that work?
- Short answer: Yes.
- Per SVC: "The cobb IC will work with our bumper."

3.) Despite it being clearly listed on their product page, while comparing the Baja vs. Mojave REAR bumpers, I didn't even think about keeping the factory backup sensors until someone on FRF mentioned it. Is there anything else I should be considering and might be overlooking when looking at the Mojave FRONT bumper?
- Short answer: No.
- Per SVC: "I think we covered everything. It is a frame cut bumper, we can supply brackets to relocate the ACC module, and it will work with the COBB IC."

Again, SVC was very helpful and gave me exactly what I needed to know, so thanks @svc and specifically Colin Jenkins. Hopefully this helps someone else out down the line.
 
Top