Decal removal

[beskarraptor]

Hey there. My bedside decal is starting to peel and I just wanna go ahead and remove both of them. What’s the best method for this? Good ole goo be gone or is there something better?

 

[Keith88]

Heat gun....start peeling.... goo be gone/wd40..... polish

 

[Shane361]

Try WD40 before Goo Gone. I've used Goo Gone many times but leave it on too long and it will damage your clear. It says it won't but feedback says otherwise.

 

[Nex]

I use wax and greese remover on the goo. But have been told it burns her eyes.

 

[goblues38]

https://www.amazon.com/dp/B006RUJ2D8/?tag=fordraptorforum-20

this is what I used to remove 32 year old stone guards from my 944

 

[Tbogo]

Hey there. My bedside decal is starting to peel and I just wanna go ahead and remove both of them. What’s the best method for this? Good ole goo be gone or is there something better?

Just removed all my decals on my 2021. Cleaned first then started with a heat gun on the small ends just to almost to hot to touch then started the peel with a credit card and kept pulling it all off without heating all of it. Came off without any glue residue or barely any. Waxed areas. Completed in about 30 minutes. Easy peasy lemon squeezy!

 

[Lunnzz19]

https://www.amazon.com/dp/B006RUJ2D8/?tag=fordraptorforum-20

this is what I used to remove 32 year old stone guards from my 944

I use the same stuff and it works great, I pulled off part of the bedside sticker and there was next to no adhesive left on the bed which made life easier. I bought a Audi that had PPF on it that needed removed years ago and that stuff took the old adhesive off took some work though.

 

[tooloud10]

My hood graphics came off remarkably easily with no chemicals at all--just waited for a hot day.

 

[ViciousRaptor13]

Heat gun and take your time.