Cutting into rear bumper! Is it tough?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

andreb

Full Access Member
Joined
Dec 23, 2014
Posts
187
Reaction score
158
Location
City by the Bay
Before I drill the first hole just curious if anyone and drilled, cut or otherwise created holes in the bumpers. The chromed bumpers on my old '95 Ranger were tough/hard. I'm installing some Rigid flush-mount LED floods and connecting them to the back up lights with a Starkey harness. My plan was to drill and use a cut-off wheel but I have a jigsaw, sawz-all and plasma cutter also. Considering starting with a hole saw and then squaring it out. Any input is appreciated.
 
Last edited:

Sano Dano

Full Access Member
Joined
Dec 25, 2011
Posts
399
Reaction score
420
Location
Encinitas, CA
Before I drill the first hole just curios if anyone and drilled, cut or otherwise created holes in the bumpers. The chromed bumpers on my old '95 Ranger were tough/hard. I'm installing some Rigid flush-mount LED floods and connecting them to the back up lights with a Starkey harness. My plan was to drill and use a cut-off wheel but I have a jigsaw, sawz-all and plasma cutter also. Considering starting with a hole saw and then squaring it out. Any input is appreciated.


Pretty easy to do.......Bumper is pretty thin....I used a metal cutting blade on a 4" hand grinder.
 

CoronaRaptor

FRF Addict
Joined
Dec 17, 2012
Posts
28,961
Reaction score
31,191
Location
CANADA
I have the same rigids, they come with a paper cut out to help you. Don't use a hole saw, drill in all four corners and use a cut off wheel or similar. As mentioned, TAKE YOUR TIME!
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,727
Reaction score
23,873
Location
here, on frf
an air/body saw is the best thing to use. i use blades with 24 teeth per inch. think of it as a sawzall but smaller and much easier to control.
 
Top