Complete Raptor Front Suspension

[Raptizzle]

Convert your F150 to a Raptor with this complete kit. Mount these parts and re-use your factory spindles. 2WD and 4WD compatible. If you have 4WD and want to maintain it, you will need longer axels.

$1,400

Parts are located in Orange County, CA

 

[KaiserM715]

Approved

 

[BlueSVT]

Any idea what the axles cost, that would be needed for a FULL conversion?

 

[Raptizzle]

No idea on the cost of new axles but I would be happy to get them at Dealer Cost for the buyer.

 

[BlueSVT]

May have a friend interested (same guy that bought your tiregate) but don't know for sure just yet...

 

[Raptizzle]

Sweet Matt! I'm gonna have to start giving you finder fees.

Now that I think of it, RPG should have an extra set of axles. I'll ask them today and see what it would take to sell them.

 

[Phyguy]

What LCA's are you going with? I have an idea on the rest...

 

[jeffbang62]

Pretty sure the raptor axles don't fit the F150's. You need to get custom F150 lengthened axles or install front differential custom 3.2" spacers (and 4" bolts that fit)that go on each side of the differential. I am doing all of this now on my 2008 F150. June 1st it all goes on the truck. I have all the stuff. If the raptor axles fit let me know. I would be interested in them as well. Nobody ever has any for sale and I have called RPG 3 times.

[email protected]

 

[WarSurfer]

Not sure about 2010, but 2011 and newer F150's all have the same spline count so they should work.

 

[Netix]

no they are shorter.....
raptor cv shafts are a longer shaft. same joints, same degrees ect but its just longer.
new shafts from tascaford for example are 205-220 each.

correct same spline