COBB Accessport Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RGVRaptor

Full Access Member
Joined
Apr 19, 2013
Posts
121
Reaction score
86
Location
South Texas
Trying to upload updated Stage 2 tune to accessport. When I try and get it from my computer to the accessport, it says "Are you sure you want to copy these 0 files to your accessport?"... Right there it's telling me that something is screwed up. Zero files? When I try and upload, drag and drop, etc. Nothing happens. Literally can't get the map to upload to the accessport through accessport manager. Tried ejecting accessport and plugging back in, nothing.

Any ideas?
 

COBB Tuning

Supporting Vendor
Supporting Vendor
Joined
Nov 19, 2018
Posts
248
Reaction score
555
Location
Austin, TX
You are able to install the Accessport without downloading anything. The maps are already on the Accessport!

To explain the issue you're having, the file downloaded is a "map pack" which contains ALL files for your vehicle. ALL meaning every model year, ECU ROM version, market, etc. In order for this to work, the Accessport would need to be installed so APM knows which of these maps to transfer. I'm sorry for the hassle! This is something fairly new so expect it to be improved in the coming months.

Kyle@COBB
 

Erik

Member
Joined
Feb 27, 2019
Posts
8
Reaction score
3
Location
Warsaw, IN
Can everyone else leave their accesport on without it draining their truck battery? If I leave mine on the dash lights up every 30 seconds and it must bring the whole truck online every 30 seconds because it completley driained the new battery in the truck the first night I had the accesport. Cobb had me put the accessport on a setting that enables the anto on/off of the accessport which stopped the truck battery drain, just wondered if anyone else has this issue or if I'm just unlucky. My fear is one of these times the access port isn't going to shut itself off and I'll come out to a dead Raptor again.
 

WC114

Full Access Member
Joined
Jun 25, 2014
Posts
184
Reaction score
87
I've been leaving it installed for a couple months now. No issues sometimes it'll leave it sit for a couple days without being started
 

cdurbin

Full Access Member
Joined
Nov 28, 2013
Posts
212
Reaction score
103
Location
Lebanon, IL
I've been leaving it installed for a couple months now. No issues sometimes it'll leave it sit for a couple days without being started

Agreed. I’ve had mine several months with no issues.

-Corey


Sent from my iPhone using Tapatalk
 

Seartrip

Active Member
Joined
Nov 21, 2016
Posts
64
Reaction score
45
I'll admit I didn't have the auto on/off set, and it killed my battery deader than snot. Lesson learned, my fault.
 

TwizzleStix

Pudendum Inspector aka FORZDA 1
Joined
Mar 4, 2019
Posts
1,006
Reaction score
1,534
Location
Commivirginia
Note I’ve had the AP in different vehicles for over a decade now. Just make sure you set the on/off to auto and all is well.

ALSO NOTE that it uses the battery voltage to turn on/off, so if you have a peak voltage controlled charger on the battery like in a vehicle you don’t drive much, when the battery/charger hits the trip voltage the AP will turn on even with the engine off. No big deal except the AP is on in a stored vehicle.

Just remember to unplug the AP if you have the car a on a charger!
 
Top