GEN 2 Builtrite Mount, 67 Design and RAM mounts

[BlazinPond]

Goal:

1. Mount an iPhone XMax, ****** 360c Radar Detector, and wife's Iphone X
2. Utilize some carbon trim to compliment my interior
3. Adjustability for future changes/additions
4. Sturdy/Heavy Duty

Here is what I used and how much I actually spent (delivered):

Total time: 2 hours (1 hr set up, 1 hour install)
Total cost: $370

• Builtrite mount ($45)
• RAM Magnetic mount and ball via Amazon ($20)
• ProClip Iphone MAX w/ power ($75)
• Misc. small bolts and fasteners via local hardware store ($2)
• 67 Design ($228)

67D-CF-BL20-BACKING-PLATE Simple Ball Mount - With Backing Plate x3
67D-CF-F70X Carbon Fiber Arms - Fixed - Small x1
67D-CF-UNI-ALU-MED Universal Aluminum Squeeze Device Holder for Android, iOS and other Devices - Medium x1
67D-CF-FMINI Carbon Fiber Arms - Fixed - Mini x1
67D-CF-DAM-ADAPTER-SINGLE The Dam Adapter™ - x1
67D-CF-F70X Carbon Fiber Arms - Fixed - Small x1
67D-CF-AMPS-PLATE AMPS-Plate x1​

 

[BlazinPond]

In car view...prior to cord management!

 

[MDJAK]

That looks very cool. Would like to see it after cord management. How did you secure radar detector, velcro?

 

[BangBang]

That looks very cool. Would like to see it after cord management. How did you secure radar detector, velcro?

The radar is mounted with a RAM magnetic mount. It comes with a metal plate that you adhere to the bottom of the radar detector and the place it on the mount.

 

[Raptor-FTW]

Did you not reinstall the rubber mat under the builtrite mount? I'm still on the fence about getting one. I usually toss my wallet up into that cubby and I worry the mount will get in the way. I wonder if I could reverse it's direction of fitment.

 

[Two Dogs]

Looks good. Can you add those ball plates after the builtrite is installed? And do you need the backing plates?

 

[tmanker]

Did you not reinstall the rubber mat under the builtrite mount? I'm still on the fence about getting one. I usually toss my wallet up into that cubby and I worry the mount will get in the way. I wonder if I could reverse it's direction of fitment.

I installed the rubber piece under the mount. I would do the same thing again.

 

[BlazinPond]

Looks good. Can you add those ball plates after the builtrite is installed? And do you need the backing plates?

It would be difficult (not impossible) to install the 67 ball mounts afterward.
Just not enough room to work with after Builtrite mount install.

 

[BlazinPond]

I installed the rubber piece under the mount. I would do the same thing again.

View attachment 119522

I like this.
If I did it again...I would have re-used the mat.

 

[HeavyAssault]

Would it be possible to have the bracket flipped around to the back?? That looks like it would still allow you to drop stuff in the cubby (if needed). Not to mention the arms look like they can be adjusted in length so that could help.