Budget friendly 20" light bars CONFIRMED to fit in rifid mounts

[Nick@Apollo-Optics]

If you're interested, our 20" curved bars also measure out to 21.5" However, because of the curve of the bar, the mounting point is not flat. That being said, modifying a bracket by slightly bending the tabs outward, should allow you to easily mount a curved bar in your lower bumper openings.

For what it's worth, our lights fit perfectly on ADD bumpers.

 

[kboss87]

If you're interested, our 20" curved bars also measure out to 21.5" However, because of the curve of the bar, the mounting point is not flat. That being said, modifying a bracket by slightly bending the tabs outward, should allow you to easily mount a curved bar in your lower bumper openings.

For what it's worth, our lights fit perfectly on ADD bumpers.

Do you have a link to this? I couldn't find a curved 20" on your website.

 

[Nick@Apollo-Optics]

Do you have a link to this? I couldn't find a curved 20" on your website.

Haven't had a chance to get them up on the website just yet, but they will be up soon. However, in the meantime, the specs are the same for our regular Elite Series 20" bar. It will still be 11,200 lumens, IP69K certified, full wiring harness, etc. The only differences will be the obvious curvature, the fact that the mounting points will be at an angle (due to curvature) instead of being flat, and lastly the retail price will be $599 instead of $549.

For full specs on our regular 20" Elite Series light, please check out this link: 20" Elite Double Row LED Bar | Apollo Optics, Inc. | Premium LED Off-Road Lighting

If you'd like any more information or a quote, please don't hesitate to PM me or email at [email protected].

Here are some pictures of our 40" Elite Series curved light installed on an ADD Race R bumper along with two of our 4" Elite Series Amber bars:

 

[Jordan@Apollo-Optics]

Excuse my ignorance, but what is special about the Rigid mount?

Nothing special, just that Rigid is the most popular LED light bar so most bumper manufacturers use their dimensions.

 

[Scott13]

I used an SDHQ mount for mine at it worked out perfectly.

 

[The Macf]

Aurora 20" in a rigid cradle. No issues.

 

[Scubasigguy]

Wrong thread.

 

[Hasty]

21" Arsenal in the Rigid mount, just bent it a little wider with some pliers, fits good.


Sent from my iPhone using Tapatalk