Borla S-Type Raptor R

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Sabeous

Sabeous

Member
Joined
Feb 6, 2025
Posts
7
Reaction score
9
Location
Liberty Lake, WA
Ok, I have an update. After a few weeks at the local Ford dealer they found that the actuators were not responding and the valves were wide open. That is so loud a 67 Shelby sounds like a Hot Wheel by comparison. Ford just released a software update and the valves are now opening and closing per spec. With this now working, it sounds amazing. On quiet the exhaust is quieter than our Yukon. On Baja it sounds like a P51. And you have a couple of nice options on Normal and Sport. I absolutely would recommend the Borla system. If your truck actuators aren’t working, have your dealer update the software. Thanks for all the posts.
 

RaptorLF18

Full Access Member
Joined
Feb 12, 2018
Posts
106
Reaction score
41
Location
Minnesota
Ok, I have an update. After a few weeks at the local Ford dealer they found that the actuators were not responding and the valves were wide open. That is so loud a 67 Shelby sounds like a Hot Wheel by comparison. Ford just released a software update and the valves are now opening and closing per spec. With this now working, it sounds amazing. On quiet the exhaust is quieter than our Yukon. On Baja it sounds like a P51. And you have a couple of nice options on Normal and Sport. I absolutely would recommend the Borla system. If your truck actuators aren’t working, have your dealer update the software. Thanks for all the posts.
The dealer updated the Borla actuators with software? My stock system has been replaced twice and it still rattles. I'm looking at replacing it out of frustration with Ford's system.
 
OP
OP
Sabeous

Sabeous

Member
Joined
Feb 6, 2025
Posts
7
Reaction score
9
Location
Liberty Lake, WA
The Borla Stype uses the Ford actuators to turn their valves. So my issue was that the actuators stopped working from Ford. Ford has a new software release that fixed the actuators not responding.

My initial issue was the cold start rattle, which sounds like a nickel in a beer can for the first few seconds. Both Ford dealers I visited tried to fix it but the issue is so common Ford doesn’t have a fix. The Borla exhaust, using the Ford actuators fixes the rattle. So if you don’t want a rattle, go with either the Borla or AWE exhaust. I went with the Borla because another forum member had an issue with the AWE and returned the entire exhaust because of a weird noise. I love the Borla Type S.
 
Top