GEN 2 Bora Wheel Spacers Installed

[Mbdurham]

Gotcha, thanks, Hopeful to mount mine this week.

Did you use Red locktite? I'm going to use blue, I can't imagine the spacers going anywhere with blue at 150 ft/lbs, but I'm worried about trying to break the red loose when it's time for brakes.

Yep I used red 272 high temp. Me either but I am going to pull the wheels off again this week and re-torque as recommended. Don’t want to take any chances


Sent from my iPhone using Tapatalk Pro

 

[tlnt60]

Just installed BORA 1.5” spacers to for Maxxis RAZR MT 35x13.5r17. With the tires measuring 14.2” between the beads, the offset is slightly more than I had anticipated, but it looks killer.

Installed using blue loc-tite, and torqued all boots to 130ft/lb.

 

[Taylor Murphy]

2018 w/ 1.5" ICON perch level & BORA 1.5" Wheel Spacer. Factory wheel and tire.

 

[Halo Raptor]

Does anyone know if the non-beadlock and beadlock wheels have the same back spacing. I have the nons and they say they are 34mm back spacing. What are the beadlocks?

 

[Pacific Wheel]

Does anyone know if the non-beadlock and beadlock wheels have the same back spacing. I have the nons and they say they are 34mm back spacing. What are the beadlocks?

They're all 17x8.5 +34 from 2010 to current. Beadlock capable or non beadlock

 

[Halo Raptor]

They're all 17x8.5 +34 from 2010 to current. Beadlock capable or non beadlock

Thanks for your help, much appreciated.

 

[ljn21]

What is the minimum width of the BORA spacers to not have to cut the factory lugs? 1"?

 

[Mbdurham]

What is the minimum width of the BORA spacers to not have to cut the factory lugs? 1"?

1.5” I would say because when I installed the 1.25 the hit slightly


Sent from my iPhone using Tapatalk Pro

 

[Jeff-Ohio]

For those thinking about getting BORA spacers, I added 1.5" BORA spacers to my 2017 (all four wheels) and had to trim the really soft plastic in the wheel wells up front. It was extremely easy to do and probably took about five minutes per side, but I was definitely rubbing at full wheel lock.

 

[GR8Ride]

1.5” I would say because when I installed the 1.25 the hit slightly


Sent from my iPhone using Tapatalk Pro

I followed your process and drilled my ‘19 Beadlocks to fit the 1.25 Bora’s as well. I am so thankful that you shared the idea as it’s a great option.
I think as the spacer gets wider there is less lug to hit the wheel so at 1.5” the lugs should need no trimming where as the 1.25” need little and 1” will need more.
BTW- your build is looking amazing!


HAPPILY EVER RAPTOR