Black 17" method NV's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Gakoman

FRF Supporting Member
Supporting Member
Joined
Mar 5, 2019
Posts
134
Reaction score
21
Location
West Lafayette, IN
Looking for a used set of methods, 6x135. Looking to buy 6 ideally, but 4 would be fine as well. Located in Chicago area as well as WI, but would be willing to drive
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
Just an fyi

I ran NVs on my 2013 for 5 years. The fake beadlock rings creates a lip that traps water on the inside of the wheel that can't drain away. The result is that you have this constant water stain. This issue is never mentioned about beadlock or fake beadlock wheels. If you pay attention recent wheels that have come out address this issue by drilling holes under this lip so water can drain away.

Also, the zinc bolts that comes on the NVs will rust so when it comes to replacing them, you want the stainless bolts. Not sure why some method wheels have stainless and some have zinc bolts. Method should just use stainless on all of them. The stainless bolts run about $87 from Method as you need 94 (4 wheels) of them. And if you think you can find an alternative, you can't. Ask me how I know.
 
Last edited:
OP
OP
G

Gakoman

FRF Supporting Member
Supporting Member
Joined
Mar 5, 2019
Posts
134
Reaction score
21
Location
West Lafayette, IN
Just an fyi

I ran NVs on my 2013 for 5 years. The fake beadlock rings creates a lip that traps water on the inside of the wheel that can't drain away. The result is that you have this constant water stain. This issue is never mentioned about beadlock or fake beadlock wheels. If you pay attention recent wheels that have come out address this issue by drilling holes under this lip so water can drain away.

Also, the zinc bolts that comes on the NVs will rust so when it comes to replacing them, you want the stainless bolts. Not sure why some method wheels have stainless and some have zinc bolts. Method should just use stainless on all of them. The stainless bolts run about $87 from Method as you need 94 (4 wheels) of them. And if you think you can find an alternative, you can't. Ask me how I know.

Thanks for the feedback, good to know! Strange why method even bothers with Zinc bolts anymore then. Wish i didn't love the look so much of the methods, because i'm currently running OEM beadlocks
 
OP
OP
G

Gakoman

FRF Supporting Member
Supporting Member
Joined
Mar 5, 2019
Posts
134
Reaction score
21
Location
West Lafayette, IN
I would split the shipping cost with you.

The temptation to get these is unreal, but I’m afraid I’ve spent too much on my truck for Christmas already. Let me check and get back to you in the next few days here. Killer deal though on them..
 
Top