Baja Designs - Universal Lighting License Plate Mounts !!!

[Baja Designs]

Baja Designs - Universal Lighting License Plate Mounts !!!



Baja Designs' universal license plate mount is the quickest way to add lights to your vehicle in a clean fashion. We offer a US Mounting Kit and an AU/EU/US Mounting Kit.
This product can use the following combinations of lights, though please use discretion when purchasing lights to not overweight the mounting location.

Light Combinations:
• Up to 3 XL Series lights
• Up to 4 Squadron Series lights
• Up to 4 S2 Series Lights
• x1 10" S8 Series Light
• x1 10" OnX6 Series Light


Universal Lighting License Plate Mount - US Plate
(sku 610002) - $35.99



Universal Lighting License Plate Mount - AU/EU/US Plate
(sku 610003) - $39.99


These are in stock and ready to ship! Take a look at www.bajadesigns.com for all of your lighting needs. Post up, PM us, or Call 800-422-5292 if you have any questions!

-Bailey, Baja Designs
www.bajadesigns.com

 

[cayenne]

The look of the AU/EU/US plate is nicer with the bar. It looks like that is what the Land Cruiser is using. How is that working with a US plate? A EU/AU plate is wide...

Can you show a close up of the Land Cruiser?

 

[Baja Designs]

The look of the AU/EU/US plate is nicer with the bar. It looks like that is what the Land Cruiser is using. How is that working with a US plate? A EU/AU plate is wide...

Can you show a close up of the Land Cruiser?

Here is the picture zoomed in a little. As you can see the AU/EU/US version is a bit wider than the US plate and can be seen sticking out. This version does have US mounting holes for vehicles here in the US. If a customer want's a stronger mount they can use the AU/EU holes as well as the factory license plate mounting.

-Bailey, Baja Designs
www.bajadesigns.com

 

[QCRappy]

Here is the picture zoomed in a little. As you can see the AU/EU/US version is a bit wider than the US plate and can be seen sticking out. This version does have US mounting holes for vehicles here in the US. If a customer want's a stronger mount they can use the AU/EU holes as well as the factory license plate mounting.

-Bailey, Baja Designs
www.bajadesigns.com

Hey Bailey,

Based on the site it looks like 3 XL's can be run on this. Those are basically a 4x4 so would it be safe to assume I could run two 7" round lights on this bar?

 

[Baja Designs]

Hey Bailey,

Based on the site it looks like 3 XL's can be run on this. Those are basically a 4x4 so would it be safe to assume I could run two 7" round lights on this bar?

Correct - this mount can accept 3 XL Series Auxiliary Lights. If you are mounting a light around 7-8" It might work but I'd be a little worried about vibration with a light of that size/weight.

-Bailey, Baja Designs
www.bajadesigns.com

 

[Baja Designs]

These are in stock and ready to ship! Starting at $35.95!
Get yours now and don't forget your 10% Forum Discount (Coupon Code: BDForums)
https://www.bajadesigns.com/products/Universal-Mounting-Systems.asp


shown w/ S8 10" Driving/Combo (sku 701003)




shown w/ OnX6 10" Hi-Power (sku 771003)




shown w/ QTY: 2 Squadron Sport, Driving/Combo and QTY: 1 Squadron Sport, Spot (sku 550003, 550001)




shown w/ QTY: 2 S2 Pro, Driving/Combo and QTY: 1 S2 Pro, Spot (sku 480003, 480001)


-Bailey, Baja Designs
www.bajadesigns.com

 

[Baja Designs]

These License Plate Mounts and other Universal Mounting Systems can be found below. We have everything from tube mounts to 20" light bar cradles! Check them out:
https://www.bajadesigns.com/products/Universal-Mounting-Systems.asp

-Bailey, Baja Designs
www.bajadesigns.com

 

[Baja Designs]

These are in stock and ready to ship! This is a great solution for customers wanting to add lights without removing the front license plate. Post up if you have any questions!


- Baja Designs
www.bajadesigns.com

 

[RaptorMaryland]

These are in stock and ready to ship! This is a great solution for customers wanting to add lights without removing the front license plate. Post up if you have any questions!


- Baja Designs
www.bajadesigns.com

Can I use them for back lighting on a 18 Raptor? They should fit.

 

[Baja Designs]

Can I use them for back lighting on a 18 Raptor? They should fit.

For reverse lighting? It might fit, but can't guarantee there won't be contact with the tailgate down. We do offer a kit designed specific to the raptor! No cutting or modifications required:
https://www.bajadesigns.com/products/Ford-Raptor-2017-S2-Reverse-Light-Kit.asp