Baja Designs | LP4 Shipping Now!!

[Baja Designs]

The LP4 is the smallest variant in the LP line up but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200° spread of useable LED light.

This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT).

To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance.

With an amber day-time running light, the LP4 will fulfill all your lighting needs.


Learn More - https://www.bajadesigns.com/products/LP4-Auxiliary-light.asp

 

[4x4TruckLEDs.com]

*2 thumbs up*

We got plenty ourselves ready to go

 

[GLOCK26]

How much

 

[4x4TruckLEDs.com]

Singles are $382.46 each and a pair is $764.96

You can choose from Spots, Driving/Combo & Amber Driving/Combo

http://www.4x4truckleds.com/led-auxiliary-lights/baja-designs/lp4/

 

[Dr_Chooch]

These would be sweet as A Pillar setup.

 

[Ben Lucas]

Are the side leds on both sides or can you get them single sided

 

[Raptor911]

All LP lights have leds on both sides.

Are the side leds on both sides or can you get them single sided

 

[raptor36]

I wonder what CREE led is found within the LP4...... curious to learn more about the light if you have any info.


Sent from my iPhone using Tapatalk

 

[WRCRaptor]

I am temporally running a set of LP6s on the hood mounts until my bumper set ups comes in. The LP6 is a bit big for me up there and the LP4 would work size wise much better. The down side to the small side LEDs is that they create a lot of glare on the windshield and is visible from the passenger light so I have covered the inside LED sets with electrical tape for now. They can not be shut off so if I run a set of LP4s I would do the same.

As for light out I would normally run a spot lens on the hood so I think a set of LP4s in spot would be very nice.

 

[stolleee]

so how would you incorporate into a 19 factory setup?