Baja Designs: General Discussion Thread - GEN 2

[OffroadAlliance.com]

Can I jump in and ask what light(s) are on the top of this bumper? Is this one bar or 4 separate lights? Direct mounted to the bumper? Any camera obstruction?

That is the Baja Designs 40" Onx6+ Arc bar. It's one bar, not four individual. It is directly bolted to the bumper itself. You are able to see just a bit of the light bar, but minimal front camera interference.

 

[Nick@Apollo-Optics]

Is there any way to simply mount it directly to the bumper?

All brackets I’ve seen (including the zroadz) raise the bar up off the bumper and thus causes more encroachment on the camera. This has been a problem for years yet every bracket does the same thing unnecessarily.

I’d be willing to do a direct drill hole into the bumper to mount a permanent light holding bracket. Don’t the lights come with a basic bracket for mounting? The F150LEDS paladin is mounted this way but I’d rather step up to either the Onyx6 or one of the Rigid RDS or RDS-SR.

The Paladin has very little camera obstruction because of the direct top of bumper mount.

If you're willing to drill, it'll will easily mount to the bumper.

 

[Nick@Apollo-Optics]

Fantastic. Now to decide which one. Have you heard of anyone getting PPF to cover their light lenses from damage? Sounded like a good idea and can’t imagine it’d be too much for something so small.

You could do PPF.

Or, you could purchase 4 of the 10" OnX6 Clear Rock Guards:



Also available in translucent amber or blackout.

Additionally, you could just run your lights as is and if you do happen to damage a lens, you can just replace that specific lens with a 10" OnX6 lens kit.



Both items would cost you the same amount.

 

[K223]

That is the Baja Designs 40" Onx6+ Arc bar. It's one bar, not four individual. It is directly bolted to the bumper itself. You are able to see just a bit of the light bar, but minimal front camera interference.

Does the 40” arc completely conform to the grill/bumper of the Raptor? You say minimum camera inference? Still wonder what you may give up but it looks like a nice option outside of drilling into the bumper. Maybe a home fabbed bracket(s) could be made. Thanks

 

[OffroadAlliance.com]

Does the 40” arc completely conform to the grill/bumper of the Raptor? You say minimum camera inference? Still wonder what you may give up but it looks like a nice option outside of drilling into the bumper. Maybe a home fabbed bracket(s) could be made. Thanks

The light bar is nearly the same curvature as the bumper. Not identical, but very close. And yes, you can still see a very small amount of the light bar in the camera. It is however far less than many options out there when you mount the slimmer profile light bars directly to the bumper itself.

 

[Baja Designs]

COVID-19 Notice:
​

March 19th, 2020:​

​

CA State Governor Gavin Newsom has issued a "stay home order" to all California residents. Baja Designs has temporarily paused most operations until further notice from the State.​

​

Select departments will continue to work from home and can be reached through their normal email addresses.​

​

We are doing everything possible to fulfill orders at this time. The health and safety of our employees, partners, and customers is of the highest concern to us and we thank you for your patience during these unsettling times.

We'll be back soon! ​

 

[MacK88DO]

View attachment 139866

COVID-19 Notice:
​

March 19th, 2020:​

​

CA State Governor Gavin Newsom has issued a "stay home order" to all California residents. Baja Designs has temporarily paused most operations until further notice from the State.​

​

Select departments will continue to work from home and can be reached through their normal email addresses.​

​

We are doing everything possible to fulfill orders at this time. The health and safety of our employees, partners, and customers is of the highest concern to us and we thank you for your patience during these unsettling times.

We'll be back soon! [emoji3531]​

Y’all stay safe and when this blows over I’ll be sure to pick up some more of your incredible products! In the mean time I’m gonna get my new XL80’s up on the a-pillars!


Sent from my iPhone using Tapatalk

 

[4x4TruckLEDs.com]

Y’all stay safe and when this blows over I’ll be sure to pick up some more of your incredible products! In the mean time I’m gonna get my new XL80’s up on the a-pillars!


Sent from my iPhone using Tapatalk

Baja is still shipping, and we have plenty of Baja inventory in our warehouse as well and we're still shipping. So let us know what you need.

 

[Sernas]

Maybe when you guys return I’ll finally get my Black Friday rebate in.

View attachment 139866

COVID-19 Notice:

March 19th, 2020:

CA State Governor Gavin Newsom has issued a "stay home order" to all California residents. Baja Designs has temporarily paused most operations until further notice from the State.

Select departments will continue to work from home and can be reached through their normal email addresses.

We are doing everything possible to fulfill orders at this time. The health and safety of our employees, partners, and customers is of the highest concern to us and we thank you for your patience during these unsettling times.

We'll be back soon! ​

 

[Baja Designs]

Y’all stay safe and when this blows over I’ll be sure to pick up some more of your incredible products! In the mean time I’m gonna get my new XL80’s up on the a-pillars!


Sent from my iPhone using Tapatalk

We appreciate the support!