Baja Designs: General Discussion Thread - GEN 2

[4x4TruckLEDs.com]

Do you have extra pictures of this setup that you can post?

Here are photos of the XL80, LP4 and LP6 to give you an idea:

XL80

LP4:

LP6:

We have full stock on the XL80, LP4, LP6 and even LP9 (although LP9 are too big I feel for pillars)

Honestly the LP6 are even a bit big for pillars in my opinion. I'd stick with XL80 or LP4s

 

[OffroadAlliance.com]

Do you have extra pictures of this setup that you can post?

Here’s some more pictures of the XL80’s. The LP4’s are a good choice as well. Our opinion is that the LP6’s will fit, but are better suited for a bumper application.

At 9,500 lumens each, the XL80’s are hard to beat for an a-pillar application. It’s what we run on our own trucks as well.

Let us know if there is anything else we can assist with!

 

[Rednose]

Here’s some more pictures of the XL80’s. The LP4’s are a good choice as well. Our opinion is that the LP6’s will fit, but are better suited for a bumper application.

At 9,500 lumens each, the XL80’s are hard to beat for an a-pillar application. It’s what we run on our own trucks as well.

Let us know if there is anything else we can assist with!

View attachment 138735


View attachment 138736

Thanks for the pictures they are useful and gave me an idea. But I was looking for the Red Raptor pictures with the LP4 and XL80 setup.
Currently I run XL80’s on my A pillar and my LP4’s are shipped and on the way so I want more of that setup in order for me to re arrange my setup when I get the LP’s



Sent from my iPhone using Tapatalk

 

[CaptainAwesome]

What's the difference between the Sportsman, the Pro, and the Unlimited on these?

Also I've noticed that most of the Baja Design Kits have (4) Modules that are 2x2 and (2) modules that are 1x2. Rigid kits are (6) 2x2.

What is the effective difference here?

 

[4x4TruckLEDs.com]

The 3 Baja kits include 1 pair of S2 (which are a 2 lens light) and 2 pairs of Squadrons (which are the 4 lens lights). That's just how Baja's done it because the brackets Baja includes, only hold 1 S2 and 2 Squadrons.

However with our CrystaLux Triple Fog Light Kits, we make our own brackets right here on Long Island. Our brackets offer the most adjustments out of any bracket and we've designed them to hold 3 pairs of Squadrons

SPORTSMEN:
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-sportsmen/

• S2 Sport, Wide Cornering (Pair)
• Squadron Sport, Driving/Combo (Pair)
• Squadron Sport, Spot (Pair)

PRO:
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-pro/

• S2 Sport, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Pro, Spot (Pair)

UNLIMITED:
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-unlimited/

• S2 Pro, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Racers, Spot (Pair)

Our Build Your Own Kits (https://www.4x4truckleds.com/2017-f...ght-kit-w-baja-designs-lights-build-your-kit/) let you pick which lights you want however. A lot of folks like the 3 pre-selected kits BUT you can also pick/choose which lights to go with.

Here is what my truck currently has using our new CrystaLux brackets:

Another example from a customer:

So as you can see our brackets let you fit 3 Squadron lights OR 1 S2 and 2 Squadron as shown here:




Check out our youtube video that demonstrates our kits. All of which are available here: https://www.4x4truckleds.com/vehicl...2017-2018-f-150-raptor/triple-fog-light-kits/

 

[OffroadAlliance.com]

We’re out here at Raptor Takeover at Durhamtown Offroad Park with a 150 Raptors! We’ve brought a ton of Baja Designs lights too. We don’t just sponsor events, we make a point to attend.

If you’re out here this weekend, swing by and say hello!

 

[Johnfaeglasgow]

Here are photos of the XL80, LP4 and LP6 to give you an idea:

XL80

LP4:

LP6:

We have full stock on the XL80, LP4, LP6 and even LP9 (although LP9 are too big I feel for pillars)

Honestly the LP6 are even a bit big for pillars in my opinion. I'd stick with XL80 or LP4s

Jesus, those trucks could fade paint!


Sent from my iPhone using Tapatalk Pro

 

[4x4TruckLEDs.com]

Jesus, those trucks could fade paint!


Sent from my iPhone using Tapatalk Pro

Ohh, not done yet. That customer, with the black truck, stopped by the shop the other day... check out what he's done now

He's still trying to find more places to mount some more Squadron Racers. (That lower 10" bar is an OnX6 Full Laser btw)

 

[Baja Designs]

 

[smurfslayer]

If I were to mount some LP 9’s in the bed, pointed directly at one of those solar cookers, i wonder if I’d be able to ignite some stuff