CM19Raptor
Member
Is it possible to run the lp4 on the a pillars?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Loving my BD lights so far. Only have one issue, a rock light stopped working after very minimal use. I reached out on the BD website about a warranty claim but haven’t heard back. About how long does it normally take?
Does Baja Designs not make a fog light with the amber backlight, like their LP4 or the Rigid Radiance?!This is a Baja Designs GEN 2 General Discussion Thread!
www.bajadesigns.com
A place to post:
-Product information
-Photos
-Questions
-Complaints and comments
Have our lights or want to know more about our products?
Please post up!
_______________________________________________
www.bajadesigns.com
ENTER: "BDForums" to save 10% + Discounted Shipping!
- Bailey, Baja Designs
_______________________________________________
Baja Designs - Ford Raptor Lighting Kits - Gen 2 (2017)
www.bajadesigns.com
Fog Pocket Kit
These kits include lights, mounts, and Raptor specific wiring. This is wired into 2 Upfitter Switches. Switch 1 - 4 Lights , Switch 2 - 2 Lights.
We offer these in 3 performance packages based on user needs and driving style. "Sportsmen, Pro, and Unlimited"
https://www.bajadesigns.com/products/Vehicle-Specific-Automotive-Kits.asp
Sportsmen - $999.95
2 - S2 Sport, Wide Cornering
2 - Squadron Sport, Driving/Combo
2 - Squadron Sport, Spot
Pro - $1,299.95
2 - S2 Sport, Wide Cornering
2 - Squadron Pro, Driving/Combo
2 - Squadron Pro, Spot
Unlimited - $1,424.95
2 - S2 Pro, Wide Cornering
2 - Squadron Pro, Driving/Combo
2 - Squadron Racer, Spot
30" S8, Upper Grille Kit - $974.95
This kit includes lights, mounts, and Raptor specific wiring. This will add one 30" S8 Driving/Combo, LED Light Bar to the upper grille and plug directly into the upfitter connection.
A nice option is to tie the Amber Backlight feature into the OEM parking lights. You have clean marker lights that will line up perfectly with the OEM!
https://www.bajadesigns.com/products/Ford-Raptor-2017-30-S8-Grille-LED-Light-Bar-Kit.asp
10" OnX6 Hi-Power, Lower Grille Kit - $624.95
This include on 10" OnX6 Hi-Power, Raptor specific mount, and upfitter wiring harness. You can cleanly add 11,650 lumens to your truck with a quick and easy installation!
The Hi-Power is setup in a Driving/Combo for maximum performance over the majority of our lighting zones. Call today and save 10%!
https://www.bajadesigns.com/products/Ford-Raptor-2017-OnX6-Hi-Power-Lower-Grille-LED-Kit.asp
Reverse Light Kit - $299.95
This kit includes lights, mounts, and Raptor specific wiring. This will add two S2 Sports (Wide Cornering) near the exhaust tips and will be hooked into the OEM wiring in the rear.
You get a much brighter setup than stock with only +1.8 amps additional draw!
https://www.bajadesigns.com/products/Ford-Raptor-2017-S2-Reverse-Light-Kit.asp
_______________________________________________
www.bajadesigns.com
- Bailey, Baja Designs
www.bajadesigns.com
_______________________________________________
Does Baja Designs not make a fog light with the amber backlight, like their LP4 or the Rigid Radiance?!
Darn... that is what I am wanting since I know Baja loghts are better than rigid. Plus I’ve heard the rigid radiance fog lights are a pretty weak light! Hoping Baja comes out with something similar while I still have my/this raptor! LolThey make a few amber backlit lights: LP4, LP6, LP9 and their S8 light bars. As far as 3" cube lights go, like the Rigid Radiance, no they don't offer one.
LP 6/9 setup with switch labels
Yes! People have actually mounted LP6’s and LP9’s on the a-pillar.
Here’s a set of XL80’s mounted next to the new LP4. We’ve got plenty of both in stock if anyone is looking for a set!
View attachment 136394