Auxiliary/Light switch uses?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mj1anderson

Active Member
Joined
Sep 29, 2019
Posts
95
Reaction score
113
Location
MN
I run 1-3 for my three spot/flood/fog pods in the bumper and 4 for my 30" Baja grill light bar.
I'm going to run 5 for some Baja light pods on my back bumper soon too.
 

RipReturns

Full Access Member
Joined
Feb 26, 2017
Posts
61
Reaction score
22
Location
Dallas
Getting the sense that lots of use them primarily for lights? Me, too, but I'm saving Aux #2 for the air compressor to power the train horn, or pneumatically-actuated gatling gun under the front left bumper.
Aux #1 - BD Squadron Pro Spots mounted in lower (center) grill
Aux #2 - just in case
Aux #3 - BD Squadron driving combo - white
Aux #4 - Diode Dynamic SS3 SAE - Amber
Aux #5 - BD Squadron wide cornering - Amber
Aux #6 - BD S2 wide cornering - white (mounted in rear)

The point is, have fun and make it yours.
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,716
Reaction score
23,848
Location
here, on frf
OK, train horn? I didn't even know I needed one. Fess up with details.
i have the katrina 5 bell train horn. i could only fit 3 of the trumpets though because of space so i used the smallest, the middle, and the largest one. they are mounted above my skid plate.

IMG_20200331_131119.jpg

IMG_20200331_131136.jpg

IMG_20200331_131025.jpg
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,716
Reaction score
23,848
Location
here, on frf
these are my additional aux switches. oem aux 1 powers all these switches so it acts as a master switch. turn off aux 1 and all the switches turn off

IMG_20200331_131049.jpg

IMG_20200331_131056.jpg
 

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,262
Reaction score
1,201
So in my planning for my light additions to my future truck, it crossed my mind that there are 6 auxiliary switches. It has been pointed out that just with my lights, I'll need an additional switch panel (see link). So I'm wonder, while planning, how many and what do people use the auxiliary switches for? A winch is all I can think of. Retractable tonneau cover? Auto tailgate? Educate me. Thanks

https://offroadalliance.com/product...e-mount-2015-f150?_pos=5&_sid=d8ddc150f&_ss=r

I don’t think you guys have seen our fully Patented Switch panels for OEM center consoles. You can add 3 Rocker Switches or get the solid top version and add up to 6 small rocker switches. These are a lot less than the kit you mentioned. They run $49 for the panel, $9 for each switch and then if you want the full harness kit, another $38 and that gives you everything you need. It also has a clean oem look. I’ll post a link to them on our site, and a video or two.

https://specialtyperformanceparts.com/collections/switch-panels-and-switches


This video showcases the switch panel at the 2:38 mark in Carbon Fiber-


Also, we will be listing our full carbon fiber F-150 and Raptor interior upgrades in the next week or so.
So for those who didn’t get the carbon fiber package in their Raptors or those who want to add that same look to their 15+ F-150’s, you can now with our kit. This is real carbon fiber. Not stickers like those dash kits. It has the 4 door panels, dash and tray. We will also be offering a full carbon fiber center console panel.

John
 
Top