ARB Compressor in Engine Bay?

[Darthyota]

Where did you get power?

I ran it directly from the battery/fuse blocks and ran it through the firewall and along the door jam. I have both a blue sea safety hub 150 and a 12 circuit fuse block mounted under the hood at the battery.

 

[TAC71]

I mounted my Viair 450c behind the front bumper and made a cover for it when not in use. the manifold with air fitting, psi switch, psi gauge and line out to the tank is also behind the grille. The tank is on the frame in front of the RR tire.

 

[Maintecheib]

Mounted my compressor to the bottom side of the radiator mount, tank on the outside of the right frame rail. Mounted the air chuck behind rear licenses plate.

 

[pat247]

I mounted mine in the bed as I needed it to be portable.

 

[TheFuriousFatty]

Behind the rear seat worked best for me, keeps the compressor protected from deep water and road salt in the winter plus it keep it from getting beat to **** like when mounted underneath or along the frame.

This looks great! Do you have any more photos you could post? I'm looking to do this exact install location but wasn't sure how you fit your air connectors and how you mounted the unit itself. Would be curious to know more about your install.

 

[Darthyota]

This looks great! Do you have any more photos you could post? I'm looking to do this exact install location but wasn't sure how you fit your air connectors and how you mounted the unit itself. Would be curious to know more about your install.

I think I posted all the photos I took of it when I did the install. I just bent a peice of ss sheet that was large enough to reach the passenger side rear seat mounting points. Then I mounted the compressor to that. I just have a short ss braided hose mounted to the compressor that reachesthe door so I can hook a regular air hose to it.