Anyone Runs 38s

[BIGDJE]

Now that truck is all done thinking of doing 38s. All suspension truck sits over 4 inches higher then stock. On 35s from ground to fender is 44 inches. My 35s look tiny now. I had all the mods done at @RPG for 37s so I know those will clear easy. 39s would be pushing but think 38s will fit.

Dever made me custom springs I would call them +6HD you can see 2nd pic is before with +4HD and after with +6HD.

 

[MurderedOutSVT]

I know it's a Gen1, but 37x13.50's on mine. BDS 4". Fair bit of scrubbing at full lock.

 

[MurderedOutSVT]

 

[blademan]

Now that truck is all done thinking of doing 38s. All suspension truck sits over 4 inches higher then stock. On 35s from ground to fender is 44 inches. My 35s look tiny now. I had all the mods done at @RPG for 37s so I know those will clear easy. 39s would be pushing but think 38s will fit.

Dever made me custom springs I would call them +6HD you can see 2nd pic is before with +4HD and after with +6HD.

I wish the shop that did you custom work would of done a video.. Has to be one of the best CUSTOM GEN 2s made!

 

[BIGDJE]

I wish the shop that did you custom work would of done a video.. Has to be one of the best CUSTOM GEN 2s made!

thank you once I get my tires on will do a full post of everything done with videos just wanted truck 100% done first

 

[PorterW1111]

39s are the perfect look. I went with 39 BFG KM3s and it really matched the size of the crew cab well. you may need to do some firewall trimming and a little off the wheel wells in the rear but with the added height you have you may get by.
link to my build thread.

Up for new tires contemplating 39s

Bought the truck awhile back and immediately put 37 grabber x3s, did the standard mid perch, cut pinch welds and correct wheel offsets. Have had it with no issues that way since then. But there has been alot of new since then so now that I’m up for new tires I’m think why not go 39”s... New to...

www.fordraptorforum.com

 

[BIGDJE]

39s are the perfect look. I went with 39 BFG KM3s and it really matched the size of the crew cab well. you may need to do some firewall trimming and a little off the wheel wells in the rear but with the added height you have you may get by.
link to my build thread.

Up for new tires contemplating 39s

Bought the truck awhile back and immediately put 37 grabber x3s, did the standard mid perch, cut pinch welds and correct wheel offsets. Have had it with no issues that way since then. But there has been alot of new since then so now that I’m up for new tires I’m think why not go 39”s... New to...

www.fordraptorforum.com

thats so bad *** @RPG has bunch with 39s but all have wider fenders front and back and full travel suspension do you have stock fenders?

 

[PorterW1111]

thats so bad *** @RPG has bunch with 39s but all have wider fenders front and back and full travel suspension do you have stock fenders?

These are only plus 2 fenders and it is stock width suspension. Had to cut into the firewall a bit but wasn’t that hard. The +2 fenders also needed some trimming to fit the 39s but the end product I liked because it wasn’t so wide like with +4 or 6s